DISH Network ES190482 Remote 40.0 ES190482 - Page 6 - Answered Questions & Fixed issues


First, ensure your tv is using the highest resolution possible (Usually 1080 for flat screens) by using an HDMI cable from the receiver to the television, and that you are on the correct input. Second, ensure your tv is not sizing the video by using the 'picture size' or 'aspect' or 'ratio' key on the remote that came with your tv (Not your DISH remote). Third, tune your DISH receiver (with your DISH remote) to an HD channel (for VIP model receivers, when you tune the channel to an HD channel, an opaque white 'HD' appears insude the blue box at the top of the screen). Fourth, hit the star key on the remote, while watching the screen. On the right hand side, near the top, it will cycle as you hit repeatedly the star key, the style of screen widening. Hit the key as often as you need to make the screen appear the way you want it to. The receiver will remember your setting for all HD channels. When finished with the HD channel, tune your receiver (with your DISH remote) to a SD channel (any channel in the guide that does not have the HD icon). Repeat the fourth step.

For Hopper/Joey family receivers, hit menu, settings, screen size. Follow the instructions to resize your screen to match your preference. When finished, repeat step four above on each an HD and a SD channel.

DISH Network... | Answered on Mar 16, 2015 | 247 views


Do yoy have a Smart TV? Make and model PLEASE

DISH Network... | Answered on Feb 28, 2015 | 380 views


If your TV and sound system both have a Digital Optical Out/In you can use a TOSLink cable (an optical cable) to connect your TV directly to your sound system, and remove the connection between the DISH receiver and the sound system. As long as your sound system is on the right input, all sound accompanying the picture on screen will go to your sound system. Most TVs also have an option to turn off the internal speakers, if not just reduce your volume all the way down to avoid that weird ghost sound effect. If you use your sound system all the time for volume, you can program the sound system to your DISH remote's AUX, and even set the remote so that it only sends volume and mute commands to the sound system (that way you don't have to dance between sat, tv, and aux all day, just leave it in sat mode).

To program your remote to the sound system, follow the instructions on the sheet you got with the remote (yeah, right like anyone kept that) http://www.mydish.com/support/remotecodes you can use that link to program your remote. You can also use the learning mode if your remote has a little glossy square on the top left side and you have the original remote to the sound system. (Learning mode can be gleaned from the remote manual Remote Control Manuals)

After programming the aux device, and verifying that it changes the volume up, down, and mute, THEN:

Hold AUX until light blinks 3 times, hit pound (#), Volume Up, 0 (Zero), pound (#), SAT, then test to make sure it goes up and down.

DISH Network... | Answered on Feb 28, 2015 | 101 views


When the SAT button blinks repeatedly, or the buttons do a dance (Sat & DVD, TV & AUX, repeat) it means you need new batteries. Replace all four AAA batteries, ensure they are all four aligned the same way, and then hit SAT. Your remote should return to its normal function. If you leave the batteries out for too long, the remote will forget how to operate the TV and receiver, so be sure to have all four new batteries ready before you remove the old ones.

DISH Network... | Answered on Feb 28, 2015 | 1,631 views


Check the input cable to dish box for firmness and the orientation of the dish.

DISH Network... | Answered on Feb 28, 2015 | 93 views


The cables connected are in the wrong spaces, either on the receiver or the television. Using component style cables, Green, Red, Blue for video, and White, Red for audio, one of the video cables is in the wrong spot. Using RCA type cables, Yellow for video, White, Red for audio, the Yellow is inserted into a green component somewhere. The ViP 722 is compatible with HDMI, which has a much higher resolution (1080p max with the ViP 722) and a better refresh rate (the ViP 722 max is 30Mhz), and as there is only one cable for both audio and video, is much easier to use, if your TV is compatible, you should look into using HDMI instead,

DISH Network... | Answered on Feb 28, 2015 | 166 views


If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

DISH Network... | Answered on Feb 18, 2015 | 35 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Type in the brand name of your device, in the search box [at the top right] of the display window, and press enter to get all related posts. It will make surf easy.

DISH Network... | Answered on Jan 15, 2015 | 54 views


You must take apart the two halves of the remote .
Remove the rubber buttons bad (It usually is one piece)

Get a bottle of 99% iso alcohol at any pharmacy and let the whole rubber pad soak for 2 mins.

While it is soaking, take the end of a rubber pencil, and use it to clean the pc board by rubbing in circles on the printed resistor ink pads individually.

Remove the rubber button pad from the alcohol and dry well.

Take the pencil eraser and rub each individual black resistor ink with it.
Then dip a Q tip in the alcohol and do ALL of the resistor ink on both the pc board and the rubber pad.

Re assemble and there you have it!

Usually when you open the remote and pull the rubber all in one button key pad out, it will be sticky, so clean the button holes on the top piece of the remote (The Insides Individually) or the problem will continue.
The rubber keys will eventually return to rubber and the small black resistor ink on the opposite side will also wear in time.

I have seen this in the shop now for almost 30 years, and it is 95% the same every time!

I hope this will help!

DISH Network... | Answered on Jan 06, 2015 | 58 views


If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

DISH Network... | Answered on Dec 29, 2014 | 82 views


557 634 811 626 633 try one of these

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/laura_08254539050d64db

DISH Network... | Answered on Dec 27, 2014 | 55 views


Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician

DISH Network... | Answered on Dec 26, 2014 | 367 views


micromax mm-e73 biss cod

DISH Network... | Answered on Jul 30, 2018 | 609 views


which Dish Receiver do u have. if it is a Dual Tuner (322,625,622, 722) u run a RG6 Coax from the Dish to the back of the Receiver. on back of the receiver there should be two ports (Dish 1,, and Dish2) u will need two short pieces of coax and a Separator ,(which should have come with the Receiver. u hook the coax from the outside Dish to the single port of the Separator , now u run a coax (or RCA or what ever) to the TV. Turn on TV and Receiver.
on the Dish remote u hit the Menu button and hit #6 then #1 and #1 again (wait for each screen to change ) u should see a signal bar at the bottom. U will need to get someone to turn the dish a little at a time till u get a signal. once u get a strong signal u hit the Check Switch and let it program.

DISH Network... | Answered on Nov 12, 2014 | 157 views


Use your TV remote "input" "source" or "tv video" input button. If using the.Dish remote press the clear tv button then input. Repeat to go back to HDMI. Make sure you press sat to change channels once you get back on the HDMI input for dish

DISH Network... | Answered on Oct 28, 2014 | 96 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

DISH Network... | Answered on Oct 13, 2014 | 98 views


Take out the batteries immediately. Your remote control need cleaning. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
You can get details about how to clean a remote control.

DISH Network... | Answered on Oct 09, 2014 | 69 views


You can check out this link for directions on programming your remote: http://www.mydish.com/support/program-non-hopper-to-receiver. Let me know if you have any other questions!

Sarah J.
DISH Social Media Representative

DISH Network... | Answered on Oct 01, 2014 | 122 views


Most likely the cooling fan bearings are going out meaning that you need a new box. Dish should send you one at no charge unless it was a purchased box from a 3 party.

DISH Network... | Answered on Sep 18, 2014 | 154 views

Not finding what you are looking for?
DISH Network ES190482 Remote 40.0 ES190482 Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1258 Answers

The Knight
The Knight

Level 3 Expert

76407 Answers

Cindy Wells

Level 3 Expert

6136 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...