Al Agnew Al Ag 3 Piece Pocket Watch Collection - Answered Questions & Fixed issues


Take your watch to your nearest watch shop and ask them to do it for you.

You can get into difficulty replacing batteries and it is not worth the risk for the small cost saving in doing it yourself.

Al Agnew Al Ag 3... | Answered on Mar 03, 2010 | 760 views


Often with battery powered watches the word "Quartz" will be written on the dial. In the abscent of that you can look at the mechanism inside (typically by removing the case back).

Alternately (this may not be an absolute confirmation) with the winder in neutral position i.e. pressed all the way in, turn the crown (winding button) and if it spins freely it's probably quartz. Because unless it's broken most mechanical watches click as the watch is
wound up (except some automatics which cant be crown wound).

Plus if it's working and left unworn for a few days yet continues to run it's probably quartz.
Please rate this solution.

Al Agnew Al Ag 3... | Answered on Jul 27, 2009 | 604 views


if you know the movement you can search on how to do this, There normally is a lever or a push pin hold that needs to be pressed down to remove the stem.

Al Agnew Watches | Answered on Oct 07, 2018 | 187 views


Look on Ebay

Watches | Answered on Jul 08, 2020 | 20 views


pull stem out a bit and rotate it to the proper time

Watches | Answered on Jul 07, 2020 | 196 views


The big one under the 12 (minutes) hand?

That only moves in Chrono mode. If it is the little dial, take it to a jeweler who does watch repairs

Watches | Answered on Jul 03, 2020 | 22 views


The Spy Net Watch was produced at least as early as 2010. Its software struggles with Windows 10 compatibility. You might try attaching the cable to a system which has Windows 7 and see what happens. I am including some links to manuals. Here is a review with some interesting points about the watch:

https://www.thebrickcastle.com/2016/12/spy-net-touch-video-watch-and-eyeclops.html

https://www.gadgetsspy.com/spy-watch-instructions-how-to-use/

Watches | Answered on Jun 28, 2020 | 92 views


Yours is most likely a 'Clip On' type which you lever off.
Most watches use one of three methods to access the battery. 'Clip on' back cover, 'Twist Off' back plate and a 'Screw Down' back cover.
'Clip On' back covers are usually smooth ands round with no notches or holes. They are levered off using a blade style lever. Some watches even have small grooves or a small lip sticking out to lever against. Most common watches tend to use this style.
'Twist Off' covers usually have evenly spaced notches or round dimples around the edge of the cover to mount a special tool to unscrew the entire cover plate like a bolt head. Some higher priced watches use this system.
'Screw Down' cover are the easiest to spot. They are usually more square in shape and held down by four tiny screws, one in each corner. They appear most often on 'Sport' watches.

Watches | Answered on Jun 26, 2020 | 32 views


Most don't automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge

Watches | Answered on Jun 17, 2020 | 69 views


https://www.google.com search showed the following link which may show how to set the time on that particular model, but it isn't name in the article.

https://www.reference.com/world-view/set-time-tghk-watch-edd21a32a00ff836

Watches | Answered on Jun 10, 2020 | 68 views


a jewelry store or a clock repair store

Watches | Answered on Jun 22, 2020 | 73 views


this is a repair help website. we dont sell buy or value anything here

Watches | Answered on May 26, 2020 | 65 views


To change the clock format, visit the General section of Momentum's Settings ??, scroll down to the Clock Format option and then click 12 hour or 24 hour to the right of it. When you switch to the 12-hour format, the AM/PM unit will display for a moment and then fade away to keep the interface clean.
https://get.momentumdash.help/hc/en-us/articles/360022896993-How-can-I-change-the-clock-format-12-hour-24-hour-

https://www.youtube.com/watch?v=VfthmmTM7Oo

Watches | Answered on May 21, 2020 | 56 views


https://www.youtube.com/watch?v=Hj1lKEULXAI

Watches | Answered on May 13, 2020 | 47 views


we will send the army over for you

Watches | Answered on May 01, 2020 | 56 views


DO NOT "POP" THE BACK OFF! You need a tool to unscrew the back. You may be able to find methods on YouTube to find out how to unscrew watch backs without proper tools. I'm not a watch repair professional but I do know that if you strip the threads you're gonna cause yourself more problems than solutions.

Watches | Answered on Apr 28, 2020 | 373 views

Not finding what you are looking for?
Watches Logo

Popular Tags

8 questions posted

Ask a Question

Usually answered in minutes!

Top Al Agnew Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Bruce Robin

Level 2 Expert

300 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you an Al Agnew Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...