20 Most Recent Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher - Page 2 Questions & Answers

I do not know this specific machine, but I have to say that if the pellet hits something regularly instead of falling freely into the machine, then the design of the machine may simply not be good for pellets. Use powder. That also allows you to use more or less when required.

if its just the handle itself it sounds like the fixing clips have come adrift or broken off,the handle strip will need replacing if its the whole console thats loose remove the outer door cover this will give you access to panel screws and may allow you to see more of the handle fitting inside.

Make sure the drainage hose is not pushed all the way through the gooseneck in the pipe. Doing so will bypass the standing water which prevents sewer gasses from escaping into the dishwasher.

Hi. Sounds like a leaky inlet valve. Sometimes they don't seal off completely or the membrane inside it could be torn. Best to replace the whole valve. Regards Sam

First you will need to remove all old adhesives. Fingernail polish remover will remove a lot, but silicone requires scraping, and cleaning with a nail file or such. Then use contact cement. Check the label to find one that is heat and moisture proof.