20 Most Recent Bosch Exxcel WFX 3267 Front Load Washer - Page 7 Questions & Answers

Electronic issues are on several cases caused by cockroahes or rats biting wires. Find out but replacing of new pc board cld be costly.

call repair shop

who set it and why I am old school and when dad said do not do something neither of our kids would test me but neither one ever got a spanking either

The Start/Pause button merely pauses or reactivates the Child Lock feature. With the Child Lock feature paused by pressing and holding the Start/Pause button for 5 seconds, press Menu. Then press the Change button. For details see the manual. The relevant details are here: https://www.manualslib.com/manual/19306/Bosch-Logixx-9.html?page=22#manual . I hope this helps. Cindy Wells

Latch could be damaged or defective.

Videos and text articles https://www.google.com/search?q=child+lock+on+my+Bosch++Avantixx+7 ..

The door lock could be damaged or defective.

Could be a damaged or defective pump. The timer is clicking and trying to start normal operation but is sensing the pump problem.

with no testing no one can determine what is wrong .call a repair service local to your location

could be motor brushes are worn, they wear out after 5years or so.

E3 error code indicates here that the washing machine has detected that the door on your washing machine is not shut and that can not start a wash cycle. If the door is shut and the E3 error still keeps on occurring that means the machine is unable to lock the door to begin a wash cycle and requires service to be repaired.

check lint filter ! is it a Front loader ? Read up on how to do this find model number and search for how to empty lint filter on model {whatever it is } on internet search

First, of all it is a Bosch "Logixx". Not a whisper of your fault code anywhere... go to this site and towards the bottom you will see a FORM to ask directly about your specific model AND your exotic fault code! Are you sure you have that "code" right? http://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes/3310-bosch-logixx-was-series-washing-machine-error-codes Then I found THIS bad news! "There are a number of different version of the electronics used in Bosch Group made washing machines and washer dryers that are sold as Bosch, Siemens and Neff and most of them use the different fault or error codes when they have a problem or a spare part fails. This particular article relates especially to the range of Logixx washing machines that have an ENR number in the format of WAS****GB/** where the asterisks replaced by a number for each one." Find a long list of fault codes here: http://www.drdishwasher.com/troubleshooting/manufacturer/bosch/error-codes Yours is not on the list? Still sure about that number? Anthony

Keep it simple; firstly, Check the sensors, water level especially as it gets clogged with congealed powder etc. Check the drain pump for debris.

https://www.fixya.com/support/t8956250-door_will_not_open_bosch_nexxt_500

Usually this is because the cycle has not completed! Complete the last cycle and the door should open.

The cycle timer is stuck at the one minute to go point.

The loading trays are flushed with water to eliminate residue that could affect following loads. For example, you would not want to have bleach dripping into a load that is supposed to be bleach-free.

E3 means there is an error with the water level sensor.

Request the manual from Bosch.