20 Most Recent Bosch Exxcel WFX 3267 Front Load Washer - Page 3 Questions & Answers


Hi , could any know what F67 ERORR CODE FOR . IT KEEP SHOWING ON THE SCRREN MY WASHING MACHINE IS I XX8 BOSCH
Thanks

Bosch Washing... | Answered on Nov 08, 2019


If your model is WFMC3301UC/06, the Main Control Board is: OEM Part # 00660809

Bosch Washing... | Answered on Nov 07, 2019


FROM FIXYA

Sanja Salatic NOV 29, 2009

The e2 error is a generic error that the machine shows if it's been overloaded or if the load becomes unbalanced during a wash cycle.


to fix you must do a master reset of the washing machine.

1. Close the door and make sure the dial is pointing to the "OFF" function
2. Hold the Start/Pause button and turn the dial anti clockwise (to the left) to the "express 15 min" program at the same time.
3. Hold the Start/Pause button for a minute (the e2 message is meant to start flashing after a minute of holding the button down however with my washing machine this didn't happen)
4. Release the button and turn the dial back to the "Off" function.
5. Select any program and the message should not be appearing.
--------------------------

Bosch Washing... | Answered on Nov 03, 2019


CL indicates child lock has been activated. to deactivate it you need to press and holding the start button for 5 seconds.

Bosch Washing... | Answered on Oct 30, 2019


the electronics lock out during power surges like you would get from brush failure giving e 21 error. you have to access service test prog to reset this, and it is not in public domain.
i do know how to reset it though but difficult to explain on this forum you may find a you tube video if you search online.

Bosch Washing... | Answered on Oct 17, 2019


Hi, I know it's kind of a silly thing but when loading the machine make sure nothing is jammed against the dispenser preventing it from opening. I've run into that a few times and people looked at me like I had two heads but when I showed up to look at the machine,it was loaded like thanksgiving dinner was just over. If that is not the issue then it's either the dispenser itself that is broken or it's not getting power from the board. Either problem will require getting into the door of the machine and running a test program. I would call a local appliance repair company as these tests require the machine to be powered up and specific tools. Hope that helps.

Bosch Washing... | Answered on Oct 17, 2019


Vanessa Lopez Oct 12, 2019
I have a Bosch 300 Series on a pedestal. Pull the drawer out completely and reach to the back of the slides, you will feel the plastic release. The left one presses up (pull the drawer a little While you press the tab up), the right one presses down (pull the drawer a little while you press that tab down). Now you can simply pull the drawer all the way out.

Bosch Washing... | Answered on Oct 12, 2019


I get paid over $180 per hour working from home with 2 kids at home. I just got ypaid $ 8550 in my previous month It Sounds unbelievable but you wont forgive ourself if you don't check it..... http://www.Geosalary.com

Bosch Washing... | Answered on Oct 06, 2019


Check that the load is within the 6kg limit and not entangled into a ball, which will unbalance the drum. Separate the items and try again. I believe Bosch has a telephone help line.

Bosch Washing... | Answered on Oct 01, 2019


Original advice in 2014 from Kenjo, on another website:
f21 is worn brushes in the motor replace them and to reset the f21 code.... close the door, turn timer dial to position 8 going clockwise, hold in the spin speed button whilst turning dial to position 9 let go of spin speed button and return dial to off position.

Bosch Washing... | Answered on Oct 01, 2019


Try ManualsLib.com if you cannot find one from the Bosch Customer assistance site.

Bosch Washing... | Answered on Oct 01, 2019


Damaged or defective latch assembly

Bosch Washing... | Answered on Sep 30, 2019


the most common problem is the motor brushes have worn out,so motor needs to be removed and new brushes fitted

Bosch Washing... | Answered on Sep 28, 2019


unplug machine You will need to check the water level censor on the back of the drum,remove rear panel look for a small plastic pipe remove it and blow gently into it you should hear a clicking sound to indicate that the censor is working clean out the small pipe with a ear bud or similar,replace and run machine. eric992

Bosch Washing... | Answered on Sep 27, 2019

Not finding what you are looking for?
Bosch Exxcel WFX 3267 Front Load Washer Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

peter gittos
peter gittos

Level 2 Expert

247 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Washing Machines

  • Bosch Washing Machines

Most Popular Question

leak detergent drawer

  • Washing Machines
Loading...