Top 20 Bosch HBN 7052 GB Stainless Steel Electric Double Oven Questions & Answers

Just get over it, it's not important. Get a hearing aid. It's most likely your ears have aged and the alarm is just as loud as before. What?
It's also possible that the little noise maker has a hole to allow the sound out and has become clogged with dripping pizza, chicken fat, grease vapors, or because it's an electronic device in a hot box it may need replacing.

Bosch HBN 7052... | 459 views | 0 helpful votes

I need more inforamation , dose the top burners work, dose any of the oven work top or bottom , Make model, serial number if you can find it

Bosch HBN 7052... | 200 views | 1 helpful votes

The ovens have separate heatin elements. Sounds like your bottom oven element needs replacing

Bosch HBN 7052... | 307 views | 0 helpful votes

You changed the element does everything else work fine, stovetop elements,broiler etc.if so check your wiring going to the new element and to the switch if they are fine it may just be the temp/control switch

Bosch HBN 7052... | 391 views | 2 helpful votes

It is not unknown for fan oven elements to fail quite regularly, some brands more than others, you must make sure you are fitting an element with the correct wattage, as this can make quite a difference to it's life expectancy.

Bosch HBN 7052... | 137 views | 0 helpful votes

If the fan is working o/k, the n you need to fit a new o ven element, located at the rear of the oven compartment behind a removeable cover.

Bosch HBN 7052... | 226 views | 0 helpful votes

if fan runs, element

Bosch HBN 7052... | 236 views | 0 helpful votes

To remove the fan unscrew the fixing nut clockwise as though you were tightening it, as it is a left hand thread, hold the fan blades at the same time to prevent the fan turning.
Ensure power is OFF.
Hope this helps.

Bosch HBN 7052... | 333 views | 0 helpful votes

I'd suggest that either the fan and its associated washer are not located correctly and fully tightened or that part of the fan has been broken off, making it unbalanced.

Bosch HBN 7052... | 210 views | 0 helpful votes

Pretty certain nofuse. Suspect switch. Guess would be as element blew it took out contacts on oven switch

Bosch HBN 7052... | 748 views | 0 helpful votes

Hi, the fan is held in place with a left handed nut, once undone, then remove the steel drive washer by giving it a light tap, finally it is a case of shear brute force applied evenly. All you need is a 10ml spanner and a medium size cross head screwdriver plus a bit of muscle.

Bosch HBN 7052... | 705 views | 9 helpful votes


Bosch Ovens | 26 views | 0 helpful votes

Certainly the hinge(s) are replaceable though while some are simple others are a major dismantling job - needing to take the assembly back to the point the hinges were originally fitted.

Parts list and diagram can be found on the link below.

Bosch Ovens | 44 views | 1 helpful votes

bad control board wont hold memory or battery if it has one

Bosch Ovens | 158 views | 0 helpful votes

then call a local repair service . we can not see it from here

Bosch Ovens | 99 views | 0 helpful votes

E011 - Long pressing of one of the buttons: the malfunction may occur due to water or dirt entering the control panel;

For this, the control panel needs to be cleaned of the dirt and the moisture. Generally, you can do this on your own by getting help from your user manual or call the appliance repair experts for a service.

Bosch Ovens | 287 views | 0 helpful votes

Not finding what you are looking for?
Bosch HBN 7052 GB Stainless Steel Electric Double Oven Logo

Popular Tags

43 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Ovens Experts


Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Paul Carew

Level 3 Expert

3512 Answers

Are you a Bosch Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Ovens

  • Bosch Ovens

Most Popular Question

its cuts electricity off

  • Ovens