Mitel 5330e IP Phone 50006476 - Answered Questions & Fixed issues

mus-ub

Login to you voicemail and listen to the prompts

A headset button can be added to the phone that when pushed will activate the headset port on the phone. Once added the light will light when headset mode is active. This button can be added through the multi-line set key assignment for in the mitel. I would also suggest added a release button at the same time as the release key would be used to disconnect a call in headset mode.

You can try to static the address of the mitel gateway and tftp (usually the same as the mitel) into the phone.

Try password 1111 as this is the default for mitel voicemail.

The PMS Buffer Full message indicates that the call processing memory on the Mitel 5540 phone is full and can no longer accept any new data or commands. The alarm code 143 indicates that the phone's PMS buffer has reached its maximum capacity and must be cleared or replaced to allow the phone to function properly.

For CLASS line functionality on the ONS/CLASS Line card, you must install a DSP module (single) on the BCC III in the same SX-200 ELx cabinet.

Question edited for clarity. It is here in the Manual http://www.ebiz.mitel.com/images/email/Telephone_Demos/demos/manuals/ax5k/1224_l1_uPV.pdf ..

Love your song 'Boys of Summer', and heard it on boom FM today! How many people phone 911 where you are!

Mitel Superconsole 1000 User Guide - Business ...

https://bcstel.com > doc > Mitel-2ICP-SC1000-UG PDF When the console is locked out, it cannot be used to place outgoing trunk calls or to access console functions, except 911 Call alarms. You can still use the ... 94 pages

Viewing 911 Call Alarms - Mitel SUPERCONSOLE 1000 SX ...

https://www.manualslib.com > ... > User manual Mitel SUPERCONSOLE 1000 SX-200 Manual Online: Viewing 911 Call Alarms. ... When a 911 Call alarm is raised, the console rings and the display shows.

Hi,my mitel superconsole 1000 is not working,on display is

https://www.fixya.com > Forum > Lands Phones > Mitel Apr 25, 2017 - Hi,my mitel superconsole 1000 is not working,on display is show blinking ALARM above F5 and ... To read a 911 Emergency Call alarm message:

• 20 Most Recent Mitel Superconsole 1000 Questions & Answers

  https://www.fixya.com > ... > Mitel Press Function 2.Press [ALARM] 3.Press [SHOW 911] This will show what extension calls the 911. 4.Record the number of the extension from which the 911 call ... ..

Hi, Sounds a bit serious. You could try powering down and re-seating all the cards. It could be a Processor issue. You could also check the Lithium battery on the Program module. I can't remember if the memory chips are soldered to the board or in sockets. It is a long while since I repaired these systems. If socketed, then I suggest carefully lifting each one in turn and re-seating them in their sockets. I have done this with SX20 boards. In time, impurities build up between the Memory pins and the socket and insulate the connection. Re-seating restores the connection, same as for re-seating the main cards. As a worst case, you could try resetting the user programming code back to factory settings and re-programme. You would need the Installation manual to do this as the programming is unconventional to say the least.

Maintenance Ports are normally so a service engineer can connect a laptop with Mitel Software and program numbers, extensions, access and restrictions easily. SX 200 Superconsole 1000 maintenance manual explains. Use CTRL+F and type in 'maintenance port'. https://pbxbook.com/other/mitel/sx200.pdf You will notice it isn't mentioned in the User Manual because it is not a user function. https://bcstel.com/resources/user-guides/doc/Mitel-2ICP-SC1000-UG.pdf ..

hi , You need to login to the pbx and update the number from system, or on individual phones need to login with password & update.

Language Change is not supported for Symbol NetVision IP phone, Symbol MiNET Wireless phone, Mitel 5005 IP Phone, or 5205 IP Phone. ... To change the display language:

1. Press SuperKey.
2. Press No until Language? appears.
3. Press Yes.
4. Press Change.
5. Press No until the desired language appears.
6. Press Ye

http://173.239.188.38/uwi/help/En/sysadmin/features_standard/language_change_description.html

https://sundance-communications.com/forum/ubbthreads.php/topics/107462/Changing_language_on_SX-50_Con Language Change is not supported for Symbol NetVision IP phone, Symbol MiNET Wireless phone, Mitel 5005 IP Phone, or 5205 IP Phone. ... To change the display language:

1. Press SuperKey.
2. Press No until Language? appears.
3. Press Yes.
4. Press Change.
5. Press No until the desired language appears.
6. Press Yes.

http://173.239.188.38/uwi/help/En/sysadmin/features_standard/language_change_description.html

https://oneview.mitel.com/s/article/How-to-Recover-Your-Phone-Voicemail-PIN

There is a feature called "Call Forwarding" On most phones these instructions work. Turning on Call Forwarding

1. Dial *72 (or 1172 on rotary phones).
2. Listen for three beeps followed by dial tone.
3. Dial the phone number to which your calls are to be forwarded.
4. If there's an answer at the number you are forwarding to: Make sure you keep the line open for at least 5 seconds to activate the service.

Turning off Call Forwarding 1. Dial *73 (or 1173 on rotary phones).

There is a settings menu that lets you choose the language to be English instead of Spanish. https://www.tasd.net/files/9014/8701/4880/Mitel_5320e_User_Manual.pdf https://www.tasd.net/files/9014/8701/4880/Mitel_5320e_User_Manual.pdf

Please provide a better description to include manufacturer make and model information. Insufficient detail to provide assistance. What is your problem or issue?

Is this a cell phone?