20 Most Recent Ryobi Two 18V Lithium-Ion Batteries + Lithium-Ion Charger Upgrade Combo Pack - Page 7 Questions & Answers


if you have the fuse take it to the hardware store and buy one preferably a couple. incase you pop a few more.

Ryobi Drills | Answered on Jun 03, 2019


My Ryobi 18V One+ charger blinks green while it's charging. When the battery is fully charged, the LED goes to a solid green. However, one battery recently had a faulty cell. After several hours on the charger, the green and red LEDs both were blinking. That indicated that the battery failed late in the charging sequence. It didn't fail the initial testing by the charger. The other battery I charged that day charged fine.

The extended capacity batteries can take 12 hours to charge in my experience. The regular batteries take less time. The charge time will depend on the battery chemistry(The older NiCd batteries take longer to charge then the Lithium batteries.)

I hope this helps. Assuming you aren't dealing with a cold or hot battery or charging environment, if you have any suspicion about a faulty battery, replace it.

Cindy Wells
(Note: I have a 12V drill as well. Those batteries takes longer to charge for the same relative capacity than the 18V NiCd batteries.)

Ryobi Drills | Answered on May 22, 2019


measure belt and should be able to find a compatible one

Ryobi Drills | Answered on May 05, 2019


These are self locking jaws and its done up too tight.
try undoing chuck by hand, then with a little more force wrap some cloth around chuck and try a pipe wrench around chuck.
make sure you turn the right way or you'll make it worse.
if no luck then take it to someone that works with tools and ask them to do it.

Ryobi Drills | Answered on Feb 25, 2019


plug it in first, turn switch on, plug in battery.
if still no lights then battery or charger is faulty.
find someone with same gear and test, try other battery or other charger to work out which.
If still under warranty take back to where you bought it from.

Ryobi Drills | Answered on Feb 25, 2019


Unless you are a bit clever with electronics, better off buying a new charger than trying to fix the internal circuit on it. here is some links to info ive found.
a new Ryobi 18v li charger will charge your nicad battery but a nicad charger will not charge li-ion battery.

http://powertool.manualsonline.com/manuals/mfg/ryobi/p110.html?p=1
http://manuals.ryobitools.com/documents/2101

Ryobi Drills | Answered on Feb 25, 2019


Try the battery in another Ryobi to see if it works.
If it does not work it may have been effected when the trimmer burnt out.
time to buy a new battery.

Ryobi Drills | Answered on Feb 25, 2019


if its still under waranty then take it back to where you bought it and get them to fix or replace.

Ryobi Drills | Answered on Feb 25, 2019


Check for clogs. Be very careful working around sharp tools.

Ryobi Drills | Answered on Feb 15, 2019


No, this is a recipe for trouble, polarity might be wrong, battery wont charge all the way etc etc

Ryobi Drills | Answered on Jan 24, 2019


First of all, the question was the charger wasn't charging the batteries. It's not the battery, it's the charger.

Ryobi Drills | Answered on Jan 20, 2019

Not finding what you are looking for?
Ryobi Two  18V Lithium-Ion Batteries + Lithium-Ion Charger Upgrade Combo Pack Logo

114 questions posted

Ask a Question

Usually answered in minutes!

Top Ryobi Drills Experts

JOHN LAPIER

Level 3 Expert

2601 Answers

Cindy Wells

Level 3 Expert

6187 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Ryobi Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ryobi Drills

  • Ryobi Drills

Most Popular Question

battery charger just not work anymore

  • Drills
Loading...