Top 20
Braun MR 5550 M HC + BC MultiQuick Professional Handheld Blender Questions & Answers
Replacement parts
Part 2: Opening up the Braun handheld blender/mixer turbo 600, typ 4191.A second phase, with the Dremel for working in the direction of the axis and splitting up the tools mounting part, also showed that no other way was available to open the machine
Looking for somebody to repair my braun blender in Cape Town
Part 3: Opening up the Braun handheld blender/mixer turbo 600, typ 4191.The front end and the motor are a cast-joint part. With one more circumferential kerf, the grip-part came free, also showing that there is no other way to open the machine irreversibly.It also showed that the contacts between the motor and the print are/were relatively loose, which amazed me for a motor of 600 Watt. And in my case: they were burnt. That explained the machine not working. It is surprising that the thermal safety didn't kick in when my wife used the machine
My Braun MR5500BC Multiquick professional
I have a Braun Vario Model 418 hand processor - motor works fine but when attached to the blender, the blender shaft vibrates - if you look into the inside of the blender, the shaft is shaking - may be some support is missing. Can any one advise what can be done.
Jaya
[email protected]
I am looking for the bleder part for the 600 turbo
Hi.
We can solve this difficulty with your any Braun Product in Bangalore. Spare Parts also available.
We are the Authorized Service Center for BRAUN in Bangalore.
Our Add.
Home Tech Serivces
# 43, 1st Floor, 1st Main, 2nd Cross, 3rd Block,
Basaveshwara Nagar, Bangalore-560079
Our Contact No. is - 080-40901310
Cell.No.: +91 97404 00030
Braun blender 4191 motor part
My GF broke our Braun handheld mixer type 4191 500W, trying to mix some figs, the mixer doesn't do anything anymore. I like the mixer very much. I poked a while trying to open it and look what is wrong. This is what i found to open it. On the top, where the numbers are to adjust the speed: remove gently that lid. Below that you'll find 2e lid with the numbers on (1-5), this you can get open by pressing inside the 2 holes with 2 little screwdrivers, push these 2 black tips away and the 2e lid can be removed. Unfortunately i broke my mixer up trying. Now it's open i see how it was. Good luck guys
How to hang my new Blender.... Actually the cord....
here is the link to the manual if you need it;
http://www.service.braun.com/line/HH/H4192/H4192_1_MN.pdf
hope the picture helps - yes it is just supposed to be stuffed in the hole - all the ones i have seen have the same thing. ????????
Hope this helps:)
Not finding what you are looking for?