20 Most Recent
Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer - Page 6 Questions & Answers
Briggs and stratton model 10t802 does not prime with correct new primer bulb
Most of the time, when the problem is NOT the primer bulb, then it IS the gasket behind it. Sometimes, an easy way to see if there is a blockage (at least on the primer bulbs that have a little hole in the center) is to stick a tiny red tube directly into it and give it a shot with carb cleaner.
I hope this helps!
Briggs 407577 surges high speed or under load,cleaned carb,changed carb. comp 155
Could also be the governor spring which automatically controls engine rpm. Under load, the governor would rev up engine to keep at optimum cutting rpm. If spring is weak, bent, or mis-adjusted, surging can happen. It is possible to adjust spring, but to do correctly, will need some way to measure rpm, and not to meby, the recommended operating rpm. Might have to replace spring if it is damaged, that is saying it is the spring. I agree with a tune up first. Plug, air filter, and fresh fuel.
Not finding what you are looking for?