20 Most Recent Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX Questions & Answers


The factory uses tachometers to set the carb and should be used to adjust if needed. To get the unit in the ball park you can lightly seat the "L" needle and turn it out 1 1/2 turn then lightly seat the "H" needle and turn it out 2 turns. Then have your dealer fine tune the carb.

Poulan Pro... | Answered on Dec 12, 2017


go to amazon.com and type in search box
microsoft word 2013
you can also use the search engines google.com,ask.com.bing.com and yahoo.com
you can also go to ebay.com and type in microsoftword 2013 in the search box

Poulan Pro... | Answered on Aug 20, 2015


the use of liquid detergents is recommended over powders in washing machines as they do leave a mud build up over time in the bottom of the wash bowl
no they do have to be dissolved before use
spin speeds are set in the machine program and cannot be altered
spin time is set in the machine program and cannot be altered
use the recommended detergents for the machine because if you use top loader detergent in a front loader it will froth up excessively and cause problems for a front loader machine
the suitability of use for the detergent ( powder or liquid) is clearly marked on the labelling on the bottle or packet

Poulan Pro... | Answered on May 15, 2015


wt820-carb-echo-cs400-fuel-lines-route-u2zok31ofbeqiqkdplhepnij-2-0.jpg which is for the fuel line with the filter and which is for the primer bulb?

Poulan Pro... | Answered on Apr 04, 2015


.025" or .6MM

Poulan Pro... | Answered on Jan 08, 2015


.025" or .6MM is the spark plug gap I assume air gap is what you were referring to is spark plug?

Poulan Pro... | Answered on Jan 08, 2015


There could be a couple of reasons why your saw won't cut.
The first thing I would check is to make sure you have your chain facing the right way.
The chisel edges should be facing forward, or in the direction the saw chain is rotating.
If this is not the problem, then I suspect the chain itself is dull.

Poulan Pro... | Answered on Nov 12, 2014


The link below takes you to a video on YouTube from donnyboy73. He shows you how to tune a Poulan Carburetor. This may be your only problem.
It has mine running in tip top condition.
http://www.youtube.com/watch?v=3Lw0pJcEPYo

Hope this helps.

Poulan Pro... | Answered on Oct 29, 2014


this video should help. not all chainsaws are alike but the oiling systems operate using the same basic... ahh just watch the videa mate. HOW TO REPAIR CHAINSAW OILER

Poulan Pro... | Answered on May 29, 2014

Not finding what you are looking for?
Poulan Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX Logo

286 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

dannydoesita

Level 3 Expert

776 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

bryan st

Level 2 Expert

123 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Poulan Garden

  • Poulan Garden

Most Popular Question

poulan 336 chainsaw need repair manual

  • Garden
Loading...