20 Most Recent Breville EW30 Gourmet Non Stick Electric Wok Questions & Answers

My dear wife took the lid handle off our breville

This is for assembling the Breville Wok lid. This has a built in vent that lets steam escape during cooking. There are 8 pieces not including the glass cover: bolt, metal vent, black O ring, tan round plastic piece, black lid piece (has open/close) on it, spring, clear plastic seal, lid handle.
Order of assembly as follows, starting on inside of glass cover.1. Bolt.2. Metal vent piece sits on top of bolt.3. Black O ring fits snuggly onto of vent piece.Insert what you have assembled against inside of glass cover, bolt poking through topside of glass.4. Add tan plastic piece with 3 prongs going facedown against the glass hole of cover.5. Larger black lid piece goes next. You will need to line up the openings on tan piece and this lid piece so that it sits semi-flush against glass. When complete this piece will turn in place to open/close vent (less than 1/4 turn before stopping).6. Add clear plastic seal to underside of handle.7. Place spring between handle and top of black lid piece and screw together until snug.
Test lid by turning lid piece. It should move back and forth according to the open/close print on top. If no luck, go to step 5 and try again. It is a little tricky, but does work when done correctly.

Breville EW30... | Answered on Jul 09, 2017

1 Answer

Breville wok model ew-10p ser no q92217

You may download a copy at http://mypdfmanuals.com/ref_sien.php?ID=2816330

Breville EW30... | Answered on Dec 28, 2013

0 Answers

Breville crystal clear water kettle repair. Kettle does not heat anymore. The heating element inside is OK. Maybe it's the thermostat switch controlling the on/off switch?

I am wondering how you know the heating element is ok when in order to gain access to the terminals in order to check it for continuity, you would have naturally checked the circuit to the element as you dismantled the kettle...

It probably isn't the switch but of course it might be...

The new fangled disc elements aren't as long lasting as the traditional type and there is probably a thermal fuse buried somewhere inside close to the element.

If it is a cordless kettle, perhaps power isn't being delivered to the kettle from the base.

Breville Kitchen... | Answered on Jan 20, 2021

0 Answers

Model BOV800XL toaster. Why doesn't the back top element heat up evenly (middle is dim)?

Breville Kitchen... | Posted on Dec 28, 2020 | Be the first to answer

1 Answer

Breville kettle blew fuse (trip switch) now won't switch on

If the 'neon' light is on, the power is getting to the kettle, so if its not heating up then the element must have broken.

This kettle has a little white trip switch inside the 'socket' of the kettle (not the base unit). If its not heating, light is not on and the plug fuse is OK, then poke the white trip until it clicks.

Breville Kitchen... | Answered on Dec 16, 2020

2 Answers

Manual for. Breville bread master BB350

manualonline.com or manufacturer.

Breville Kitchen... | Answered on Nov 16, 2020

1 Answer

I have been given a Breville Super wizz model FP 2a with no instruction manual, not even sure if all parts are there, can I get a photo of what the components are please

Is your requirement still current? I have the FP-2A with all patrs, I could possibly send pics if that is helpful.

Breville Kitchen... | Answered on Nov 02, 2020

1 Answer

How to put lid of Breville wok together

The above is almost right, bu the clear plastic ring goes between the tan piece and the glass. That is step 6 comes just ahead of step 4 but on the same side of the glass. The clear plastic ring holds the tan piece firmly against the glass to keep it from rotating. The inside of the ring goes around the tan piece's three prongs. Note that the inside of the clear ring is not perfectly round the slight indents line up with the prongs.

Breville Kitchen... | Answered on Sep 19, 2020

1 Answer

Why is my Breville smart toaster only toasting one side of bread?

We heard directly from Breville that these toasters are DESIGNED to do this! Ours toasted very unevenly for a month and then stopped toasting on one side all together.... Breville says too bad; it's designed to work like a "restaurant" toaster -- which is apparently one side only. We told them that it used to work somewhat, but now one side doesn't work at all. They said that we are mistaken -- that it never toasted both sides. Can you imagine? Unbelievable.

Breville Kitchen... | Answered on Nov 21, 2019

1 Answer