20 Most Recent
Leeson Reversible Electric Motor 1/2 Hp, 3450 Rpm - Page 3 Questions & Answers
Tension lever for nu-tools wood lathe
ask maker this. (or seller)
the lathe came with a manual , lost that/
and on the last page it shows contacts list , read that
?
or google for makers support.
moved you out of cars to tools.
Paslode fan won't turn on
what color is the light when you insert battery? then what color is it when you try and fire the tool? you could have a couple problems, first does the light even come on? If not the battery contacts might be bad. second you got light but no fan, could be a spark plug wire, bent lower probe circuit board bad and lastly bad fan motor. Let me know about the lights first and we will go from there
Stanley tr-70 spring has no tension
It sounded good but made no sense. How do you remove the trigger/ squeeze handle assembly? This thing (Stanley TR70) is riveted together. The only piece that is removable is the staple feed tray.
Dewalt 734 Planer leaves marks on the wood from the 8 knife screws
Try going back to basics. Yes, I've been caught out by something silly and obvious! Are they the correct OEM blades for that model? Are there washers/spacers fitted on the mount screws? Are they the correct screws? Have all the access covers and cutting guides been refitted correctly? Has the depth guide been set correctly?
Some planers can be fitted with thicker or thinner blades depending on the model. Washers/spacers may need to be fitted under the blades so they are 'trapped' and lift the blade high enough to clear the screws. Are the original screws 'dome head' or 'countersunk'? Domes will sit higher and touch the wood as the blade spins. The access covers, cutting guides and depth gauges could be out of position affecting the cutting platform.
How do you change the bit on a black and decker 5/8 router
in wood. The tool consists of a motor that drives a cutting bit; the bit spins quickly and cuts the wood. The router can be moved horizontally through the wood to form a desired shape, and the type of edge on the shape is determined by the design of the router bit. Different edge designs can be cut by changing bits. It is very easy to change the bit on a Black & Decker router.
Step 1
Turn the router off and ensure that it is disconnected from the power supply. Wait for the router bit to cool down if it was recently used.
Step 2
Detach the chip shield from the back of the face plate.
Step 3
Depress the spindle lock button on the side of the router and rotate the spindle until it locks.
Step 4
Turn the router upside down and place it on a flat surface.
Step 5
Keep the spindle lock button depressed and loosen the collet nut that holds the bit with the spanner wrench. The collet is the device on the router that holds the bit in place.
Step 6
Remove the bit and insert the shank of the new bit into the collet. The shank should protrude at least 1/8" from the collet.
Step 7
Keep the spindle lock button depressed and tighten the collet nut with the wrench.
Step 8
Release the spindle lock button. Reattach the chip shield.
Not finding what you are looking for?