20 Most Recent York Furnace Draft Inducer Blower Fasco # A224 Questions & Answers

  1. sounds like the control board. i cannot confirm this as i am not able to come sit in front of your furnace. please have a tech come to sit in front of your furnace and figure it out!!

York Furnace... | Answered on Jan 03, 2018

Hi check out the pressure switch clean the air filter and check out the fan control see if this is clean

York Furnace... | Answered on Nov 06, 2015

small dual gas turbine and use electric heating and supplies your home also ....

York Furnace... | Answered on Aug 14, 2015

There is a switch, activated when you open the service panel, that kills most power to the unit, including the DI Blower motor. Your furnace should also be equipped with an exterior kill switch, or there's always the good old breaker box. Good Luck!

York Furnace... | Answered on Mar 10, 2015

The "mother board" or integrated control module is essentially the brain that controls the sequence of operation in your gas fired furnace. It is located, generally, in the blower compartment. That is the bottom of the two compartments of the in the furnace. It looks like a circuit board with all the wires of the furnace leading to it.

York Furnace... | Answered on Dec 19, 2014

Nordyne Furnace, pilot is lit, thermostat is reset, Heater is on but blowing cold air.

York Furnace... | Answered on Dec 19, 2014

i have fixed almost every one of pc9 -----we have installed in our company,code three{flashes} at first new presure switches installed, same thing,york knows about this,induction motor bearings,could be bad.our local york dist, has boards,inducer, ***.motor, dual press.switch,free.as is known as the only way to fix.after all else is ruled out.one local competator called us if we wanted to join class action suit . good luck.furnaces work good at first, season or two then bam

York Furnace... | Answered on Nov 25, 2014

Does it run if youn pull the thermostat from the base?

York Furnace... | Answered on Jun 08, 2014

These pressure switches are safety features on ALL new furnaces, if replacing the switch didn't solve the problem, you might want to make sure there is no blockage in the exhuast pipe like a birds nest, anything that would restrict airflow, is there inline fan motor in the exhaust pipe ? perhaps it's not working also.

York Furnace... | Answered on Dec 21, 2013

There should be a gasket between the mounting flange of the inducer motor and the furnace. If you do not have that you can use a small bead of blue or red silicone caulking to seal it. Hope this helps you. Thanks

York Furnace... | Answered on Dec 21, 2013

filter may not be in correctly. if it is gas, check the pilot, if it doesn't have a pilot, it may be the ignitor. depending on how new your furnace is, it may have a safety feature that won't let it start for some reason. seeing that it will at least start the cycle is a good sign. it may be the filter not placed right. i'm not a furnace expert, just know my experiences. you may want to look at the limit switches as well, they only require a tester to see if they are good. if you own the testers, you probably know what you're looking for.

York Furnace... | Answered on Dec 03, 2013

Is it a gas burner? Does it have a pilot light?

I’m happy to help further over the phone at https://www.6ya.com/expert/bob_62dfa2f81bb55288

York Furnace... | Answered on Sep 30, 2013

Not finding what you are looking for?
York  Furnace Draft Inducer Blower Fasco # A224 Logo

136 questions posted

Ask a Question

Usually answered in minutes!

Top York Tools & Hardware - Others Experts

Brad Brown

Level 3 Expert

18596 Answers

Paul Carew

Level 3 Expert

3534 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Are you a York Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

York Tools & Hardware - Others

  • York Tools & Hardware - Others

Most Popular Question

removed fasco 7021 11577s when bearings

  • Tools & Hardware - Others