20 Most Recent
Dewalt DC830KA Heavy Duty 14.4 Volt 1/2 Inch Compact Impact Wrench - Page 8 Questions & Answers
Need DeWalt dw625 router manual
Please check your product label (the one with the serial number) and determine which type your model DW625 router is. Dewalt has two. Dewalt has the manual for the router on the product support page:
http://servicenet.dewalt.com/Products/Detail?isId=true&productNumber=DW625&selectedType=3315# . Select the type in the drop down menu below the model number. Then click on the link to the manual on the right side of the page. You can either download the pdf or e-mail it as an attachment to your mail account. I hope this helps. Cindy Wells (Note you will need Adobe Reader or a similar program to read the file.)
2001 f150 4.2v6 changed plugs wirers coil pack
Do you have a check engine light??If not, look for a bad vacuum leak on the intake manifold. I do believe on this motor there is a long plastic tube that goes from the back left corner of the motor (if looking at it from the front) from the PCV valve to the front lower center of the intake manifold. There is a 45 degree rubber connector there for that plastic tube to connect to the intake manifold, check it for breaks or leaks, as with all the other vacuum lines and connectors.Fords are SUPER sensitive when it comes to intake manifold absolute pressure.
I bought a dewalt planer model DW 735 but did not
try going to dewaltservicenet.com and on the left hand side under find parts (small print manuals) type in your model number it will redirect you to the manual/breakdown page. the manual is 60 pages long if you download the complete one. Let me know if you are still having trouble.
I called and ordered a manual for a dewalt planer
Don, I don't know where you might have called but you can download this manual in a couple minutes by going to "dewaltservicenet.com" and on the left hand side type in your model number under manuals and it will redirect you so that you can download. The manual is 60 pages long if you choose the full manual or you can see what language you want and set your printer accordingly. Please let me know if you need more assistance.
The rollers which feed the wood thru the planner
could be a loose set screw, chain problem or gear. You didnt specify what the model number is so I am just going from experience. Let me know what brand and model and I will try and find you a manual or breakdown for the tool.
Replace blade on dewalt dw
The DW733 has 2 blades which can be sharpened. However, to replace the blades:
1. Remove handle
2. Remove cover
3. Remove screws that hold binder to the blade.
4. Lift out blade, be careful not to cut yourself, extremely sharp
5. Replace in reverse order
Hope that helps.
Handie Andie
I ran over the cord
if you give me the model number I will find a replacement cord for you. The way I remove this cord is a pair of pliers and you have to "pull" the cord out of the roller if it is stuck there. Let me know how I can help
How do i change the blades
Disconnect the planer's power cord, then use the T-wrench that comes
with the planer to remove the four screws that secure the top of the
planer. Lift the top to remove it from the planer.
Remove the three wing nuts holding the dust cover over the cutter head.
Rotate the dust cover up to unlock it from the fan housing, then push
the cover to the left to disconnect it. Remove the dust cover from the
planer to expose the cutter head.
Rotate the cutter head with a piece of scrap wood until the lock on the
side of the cutter head engages. All eight screws in the cutter head
clamp should now be visible. Remove the screws using the T-wrench, then
turn the T-wrench upside down and use the magnet in the head of the
T-wrench to grab the clamp. Remove the clamp to expose the knife
underneath. Use the magnet to remove the knife.
Rotate the cutter head with a piece of scrap wood until the lock on the
side of the cutter head engages. All eight screws in the cutter head
clamp should now be visible. Remove the screws using the T-wrench, then
turn the T-wrench upside down and use the magnet in the head of the
T-wrench to grab the clamp. Remove the clamp to expose the knife
underneath. Use the magnet to remove the knife.
Press down on the cutter head lock to free the cutter head. Use some
scrap wood to turn the cutter head for access to the remaining two
knives. Follow the instructions in Steps 3 and 4 to remove and replace
those knives.
Press down on the cutter head lock to free the cutter head. Use some
scrap wood to turn the cutter head for access to the remaining two
knives. Follow the instructions in Steps 3 and 4 to remove and replace
those knives.
My 13" DEwalt Planer feed is slipping and leaving
Hello Ken,
The black marks you are seeing are most likely from the rollers that feed the material threw the planner. The marks are left on the board when the board stops but the feed rollers are still spinning.This occurs when the feed table is stickey with items such as pitch. I would clean off the table completly and wax it ( or some type of lube).
Another cause could be the matrial that you are using, if the stock is real rough it will not slide as easy as a smooth board.
I hope this helps.
Shop Dog.
P.S. after waxing or lubing the table run a scrap piece first to wipe off any excess.
This maybe a stupid question, but how do you get
It depends on what kind of sander it is. If its a belt sander then on the side there is a lever that comes outward. it releases the tension then slip the old one off and new on and push lever back in place. If its a palm sander then on each side of the pad there will be 2 silver rods there. you push the rod in and then pull up and it releases a bar that wil go up and down for you to put the new paper on with.
Need manual for dw733 type one. was told I could
You can it is 30 pages long and I just pulled it up. Go to dewaltservicenet.com and on the left hand side type in your model number and then click on planes, wait and it will ask you for type number and click on 1 it will bring up another page and on the right side it is the 3rd selection down for manuals. If you have any more problems let me know. I am going to try and upload it to this site
Looking for user manual for
go to dewaltservicenet.com and you can download a copy of this manual. I just looked at it there and I will try to upload to Fixya so it will be in the archives
Not finding what you are looking for?