20 Most Recent Cuisinart DGB-300 Coffee Maker Questions & Answers

Why does my DGB-300 grind coffee but doesn't brew?

having no idea where it get water from does not help us figure it out , would suggest checking with the manufacturer's website for technical support .but 15 years is a good long life . some burn out in only 3 or 4 yrs

Cuisinart... | Answered on Sep 17, 2017

1 Answer

I need a new latch for the reservoir lid

Fixya does not sell replacement reservoir lid latches. Check with a local appliance parts distributor.

Cuisinart... | Answered on Oct 19, 2016

0 Answers

How do I set the time on the LED clock?

Cuisinart... | Posted on Apr 11, 2015 | Be the first to answer

1 Answer

How do I remove the filter basket from Cuisinart Programmable coffeemaker CBC-5200PC Series?

I have this coffee maker and the basket comes out with the grinding cup and assembly. It's all one piece and pulls straight up.
You may need to pull a bit harder.

Cuisinart... | Answered on Jun 11, 2014

2 Answers

The grinder motor does not turn on when i start

Make sure you have the dial that sits on top of the filter basket turned to the open hole. Otherwise, it will not grind as it can not send the coffee grounds into the basket.

Cuisinart... | Answered on Mar 07, 2014

0 Answers

I am looking for the

You may be able to order a replacement grinder basket online from the following site:

http://www.abtecparts.com/cuisinart_coffeemaker_baskets.htm

Thank you for using FixYa!

Cuisinart... | Answered on Aug 14, 2012

0 Answers

Broken latch on Cuisinart DGB 300

Cuisinart... | Posted on Jan 24, 2012 | Be the first to answer

0 Answers

When I tried the vinegar cleaning of my cuisinart dgb-650 it won't run, I push start and it sounds like the end of the cycle and then it beeps, help!

Cuisinart... | Posted on Jan 23, 2012 | Be the first to answer

1 Answer

Need replacement lid for Cuisinart DBG300

I believe your model is actually the DGB300. Available replacement parts can be ordered online from Cuisinart at:

http://www.cuisinart.com/discontinued/coffee_bar/dgb-300.html

Unfortunately it may be necessary to order the complete carafe. You may wish to try contacting Cuisinart using their web inquiry form to see if they are able to provide the lid as a separate part:

https://www.cuisinart.com/support/international.html

Cuisinart... | Answered on Jan 20, 2012

0 Answers

The grinder on the coffee maker has stopped working. The grinder only makes a low buzzing sound now.

Cuisinart... | Posted on Nov 28, 2011 | Be the first to answer

0 Answers

[email protected] drinder will not come

Cuisinart... | Posted on Jun 26, 2011 | Be the first to answer

1 Answer

DGB-300

Definitely do the vinegar/water cleaning. It will almost undoubtedly resolve your issue.

Cuisinart... | Answered on May 18, 2011

1 Answer

The grinder on my dgb300

Hello

Open the water reservoir of your Cuisinart coffeemaker and fill it with water using the coffeemaker's carafe. If you forget to add water to the coffeemaker, the brewing cycle will not start.

Turn off the auto start feature on your Cuisinart coffeemaker if the brewing cycle does not begin when desired. If the coffeemaker is programmed to brew at a specific time, the light near the "Program" button will be lit. Press the "On" button to override the programming and begin brewing immediately.

Program the automatic brew start time by pressing the program button on the control pane. Set the brew start time with the hour and minute button and allow the program mode to reset to normal time after a few seconds.

Cuisinart... | Answered on Apr 16, 2011

2 Answers

The motor on my Cuisinart DGB-300 Coffee Maker

HI,

First, do a motor test by removing the work bowl completely and using a pen to press in the grey button on top of the base (with the food processor turned on of course), toward the back. If the processor spins, the motor is still good. At that point, I would inspect the work bowl pieces, lid, pusher assembly, etc for cracks/damage. If all appears well, insert ALL the pieces back into place and try again. If even one piece is out of place, the processor will not spin.

If it no longer spins, the motor has a problem.You need to replace it.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Cuisinart... | Answered on Nov 03, 2010