20 Most Recent
Cuisinart DFP-14BC Custom Food Processor - Page 9 Questions & Answers
It doesn't turn on. Could
Most likely, the problem is the safety switch at the top, where the lid latches in to, or, the nib on the lid could be broken, chipped or worn away.
Cuisinart DLC-8 Plus Motor Shaft Cover broken.
I had the same problem: Cuisinart sent a "replacement" sheath for my DLC-8E which turned out to be the wrong one. When I replaced mine,which was cracked, none of my blades would fit over the new sheath! I "solved" the problem by purchasing a new DLC-8E motor base on Ebay for only $9.99!
I received a processor for
Return it!! Unless it wasn't this past Christmas. If you recieved it as a gift you shouldn't have a problem returning/exchanging it!
How to load feeder cuisinart dlc7p?
Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.
Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!
If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question
IDLC-10 Cuisinart food processor. that won't run when locked
Hi.
According to description, in the safety switch hole there should have been a plastic rod and a tiny spring. Those parts are missing.
This tiny parts for older are difficult to find. Call Cuisinart at number listed on owners manual. The part is often called safety lock.
If they do not have the part, then you will need to do repair yourself.
Note: as stated on the owner manual, appliances must not be modified with non original parts, and not even serviced from non-techs.
For this reason I cannot suggest you to put a plastic rod to hold down the safety lock.
Regards.
Not finding what you are looking for?