20 Most Recent Reebok 8050 ES Treadmill - Page 4 Questions & Answers

They would be proprietary to Reebok. https://www.google.com/search?q=reebok+studio+running+watch+replacement+chest+clip+parts ..

If you wish to get some details; check the site linked here. Pull up older posts.... http://electro-medical.blogspot.com/

Rebock zr9 treadmill is working but cant see the screen

E01 error code: communication failure: console board and control board cannot communicate.probably console board issue or control board issue or data cable issue. replace a data cable,checking whether the machine can running? If no, Replace the control board.

Question moved from Computers and Internet. Try a Power Reset.

How do I Repair a Reebok Treadmill? - eHow UK

https://www.ehow.co.uk > how_7313278_do-repair-ree... Locate the power switch on the Reebok treadmill. It is near the power cord on the frame of the treadmill. Press the power reset button and wait five minutes ...

How to Troubleshoot My Reebok Treadmill - SportsRec

https://www.sportsrec.com > Fitness > Cardio Reebok treadmills are made to maximize your exercise experience. ... you can browse the troubleshooting tips in your user manual to rectify the situation.

What to do when Your Reebok treadmill is not working?

https://idswater.com > 2020/11/17 > what-to-do-when-y... Nov 17, 2020 - When done the treadmill will perform the reset. Sole Fitness - Press the stop button to ensure nothing is running on the machine.

If motor not run than must replace brushes in motor. I

Manual for sale online - $14.99 http://userguides.50webs.com/reebok_tr2_manual.html

Rather than this being a belt lubrication proble, which is what this error means on some treadmills, for your brand, I believe the following applies. E01: This indicates an interruption of power between the power in socket and the console. Check all wires at the base of the right arm are connected. If so, contact technical support. A link to such follows. https://www.reebokfitness.info/support

notify reebok

https://www.youtube.com/watch?v=qbAovLIcc4s This is a link to the instructions

I have a problem with my reebok i walk i run treadmill. The belt does not move on the lower speeds and after using it there is a burning smell even though it is working fine once I get past the first two speeds. I have had it 2 years but have never oiled it as I am not sure how and where.

Your treadmill may not be turning on due to a broken or a failed power supply or a broken power cord or a tripped circuit breaker switch a failed circuit breaker switch a bad power switch or wiring failure or a bad motor control board or failed console display screen can stop the treadmill from turning on. If the outlet is not working try to reset the house circuit breaker which is located inside of the fuse box to restore power to the outlet.

i too have this problem am under the impression there is a problem with the resistance but am waiting on areply from reebok technical support

Loosen, but do not completely remove the idler bolts (on the back where you get on). Remove the side rail and motor hood (left side usually). While turning the drive roller by hand, pull on the inside of the belt in order to walk it off of the drive roller pully. Remove the belt and put the new one in.

Check the low voltage supply, that is what supplies the 'brain' and display.

You failed to mention your question.

Contact Reebok directly to request the schematic diagram.

Error code E05 indicates a problem with the belt speed. Unlikely it is a bad sensor given the smell and heat. Hopefully it is under warranty. There are troubleshooting tips is the user guide. Here is an assembly model that serves for both the ZR8 and ZR9. The following indicates how to adjust speed and lubricatrThe first one may help narrow down the problem but the others may prove more helpful. If adjustment does not help, you likely will have to try a service tech. https://anytreadmillparts.com/pages/treadmill-error-code-troubleshooting https://www.sportsrec.com/351318-how-to-troubleshoot-my-reebok-treadmill.html https://www.manualslib.com/manual/1064934/Reebok-Z9.html https://www.youtube.com/watch?v=OFn0aVzkFlE

Request the wiring diagram from Reebok.

Contact Reebok directly to request the diagram.