20 Most Recent
Vizio 60" E601I-A3 Full HD LED-LCD TV - Page 4 Questions & Answers
Why is my Vizio TV stuck on mute.
The one logo is coming from the set top box that is supplying the signal, cable box, satellite box, Android box etc. Look for Mute on that remote, or cut the power to all your devices by removing the wall plugs. Wait 15 minutes and plug back in.
..
How do I fix a Vizio TV?
Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
Some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement.
Vizio E50-C1 power on light is on but can't turn off. No picture or sound.
You have a balling issue with the main CPU IC, you can try baking the board in the over, it's possible you will get it to work again for a while doing that, see youtube vids on baking a main board in the over for how to do it. The correct way to fix the TV is replace the main board, here is a listing for a board, stay away from ebay on buying TV parts. https://www.shopjimmy.com/vizio-756txfcb02k0450-main-board-for-e50-c1-ltc6skar-serial/
My menu button on my Magnavox universal remote on to my Vizio tv
On a VIZIO remote, the menu button will either look like a gear wheel icon, or it have the word "MENU" printed on the button. To get TV channels using an antenna, you will need to connect the antenna to the TV first. Next you will need to change the input on the TV screen to the Antenna or TV input.
How to fix ghost pictures on my Vizio tv
A model would have been nice but not really needed in this case as this is a common easy fix, first off, unhook one ribbon connector going to the panel boards one at a time power the set up and see if you get a normal half picture, no ghosts, if you do the panel is defective and the set isn't fixable, I don't think this will be the case however, you have a bad tcon board, order a new one and replace it if you still get half a picture with the ghosting. Easy diagnosis and low cost fix with the correct advice. Try shopjimmy for the best chances of getting a working board, do NOT buy one from ebay
What's the issue with my black screen Vizio M3D550KD? It powers on, I can see the backlight and hear volume. It was working great until yesterday.
There could be a few possible issues causing the black screen on your Vizio M3D550KD. Here are some troubleshooting steps you can try:
- Make sure all cables (HDMI, component, etc.) are securely connected to both the TV and the source device (e.g., cable/satellite box, DVD player, gaming console).
- Try using a different HDMI cable to connect your source device to the TV, as the cable may be faulty.
- If possible, test the TV with a different source device to see if the issue is with the TV or the original source device.
- Unplug the TV from the power outlet, wait for a few minutes, and then plug it back in. This can sometimes reset the TV and resolve temporary issues.
- Check the TV's menu settings to ensure the input source is correctly selected. Use the remote control to navigate through the TV's menu and adjust settings if necessary.
- Perform a power cycle by turning off the TV, unplugging it from the power source, and holding down the power button on the TV for about 10 seconds. Then, plug the TV back in and turn it on.
- If none of the above steps work, there may be a hardware issue with the TV itself. In this case, it is recommended to contact Vizio customer support or a professional technician for further assistance.
Not finding what you are looking for?