20 Most Recent Electrolux EOD5330 Ultrafan Electric Double Oven - Page 7 Questions & Answers

this is an error for the touch controls its often caused by moisture getting into it, there is a strip of foam you fit under the touch panel to prevent it happening, it can be ordered from electroloux

well if it fits in your dishwasher with top rack out then that works great , or if there just too large , try soaking in a home made pan of dishsoap concentrate , I made a pan large enough to fit some from a nasty ole commercial stove out of an ole tarp that I had covering up the wood pile (the wood didn't mind ) and piled a few things laying about under its edge to form a shallow pool in the yard then a bit of water from the ole hose and lots of good strong dish soap , a few hours gone by soaking and it hoses right off , yuk and all !!

Hello BOLD POINTS, Would that you had a warranty I'd suggest you get the ELECTROLUX folks out there... but if your wallet is as abused as mine... Put your model number and the parts (or "spares" (depending on what part of the planet you are on))... You should get some control board SUPPLIERS... With video help on several... Just make sure to work SAFELY... Take pictures and note what COLOR wires go to what terminal BEFORE YOU GET IN TROUBLE... after does NOT help. Search Over 2 1 Million Appliance Parts PartSelect Appliance Parts and Repair Help ereplacementparts.com FIND PARTS FAST I am personally loath to recommend SEARS... but they are getting a little competitive... (so I won't)... but they do have a decent online library http://www.searspartsdirect.com/partsdirect/brands-products/Electrolux-Parts/Wall-oven-Parts

Overload to the system.

needs looking at by an oven repair guy soon as possible faulty control board /knobs or thermostat

It would not be element bc it only works when supplied voltage. And obviously it works when supplied voltage. Whatever is sending voltage to the top element that shouldn't be is the issue. Such as control board

replace the oven control switch

Hello Avishag, thanks for your post! From what you have described your Electrolux oven is ringing after you have used the pyrolytic cleaning. Your control panel may need to be reset and you can do that by disconnecting power from it for at least ten minutes. If this does not help resolve your issue I would need your model number to further assist you. You can locate that information on the frame of the door on a white or silver tag. Once I have that information I would be happy to assist you further. -Matt