Samsung SCX3405FW - SCX-3405FW Wireless Multifunction Laser Printer, C - Answered Questions & Fixed issues
Has a lsu error
Dear Ian
Pl. open the LSU and clean the optical path and polygon motor with a dry cotton lint free cloth. If not resolver then replace the LSU.
Thanks.
3/18/2015 3:27:30 PM •
Samsung SCX...
•
Answered
on Mar 18, 2015
•
124 views
Has a lsu error
LSU stands for laser beam scanning unit. You will most likely have to replace it.
3/18/2015 3:27:37 AM •
Samsung SCX...
•
Answered
on Mar 18, 2015
•
48 views
Black line vertical while scan and photocopy a document
does it happen when you put it on the glass or only thru the document feeder? if only when you use the doc feeder then it is something on the slit glass the small piece of glass about an inch wide next to the big sheet of glass. some times ink from a pen od dirt gets baked on the slit glass. it can be hard to get off but if you look closly then you can see it and clean it off.
3/9/2015 3:39:52 PM •
Samsung SCX...
•
Answered
on Mar 09, 2015
•
200 views
HOW TO UNLOCK THE SCANNER
Dear
You have not mentioned the model no. However certain model of SCX (viz-5315,6122 etc.) has a scanner lock bellow the platen body. That might have locked.
Other has no locks, since no movement of CIS(scanner) results scanner lock. Mostly the platen cover and the scanner assy. realigned solve this problem. Also in case of small A4 SCX printer, slightly knock with your palm at both side of platen may sometimes over come the problem, make sure after your try machine should OFF and ON.
if the above are not working, then the printer needs hardware replacement may be, scanner drive motor or Main PBA.
Thanks.
2/26/2015 3:09:18 AM •
Samsung SCX...
•
Answered
on Feb 26, 2015
•
299 views
Samsung scx 4300 error paper jam1 install toner
Sir
there is a sensor lever at middle of the engine base, under the toner cart. when the cart inserted it has to pushed half and other half is for paper jam-1 error.
Pl. check the lever-check the smps photo interrupter-check the mech alignment of the lever- also check the cart hold lever(left-right) pressure (found on top of the engine base).
Thanks.
12/25/2014 5:11:21 PM •
Samsung SCX...
•
Answered
on Dec 25, 2014
•
433 views
Not finding what you are looking for?