20 Most Recent Canon imageRUNNER 2520 Laser Multifunction Printer - Monochrome - Pl1 - Page 6 Questions & Answers

The error message "Could not start up under the current environment" typically indicates that the driver you are trying to install is not compatible with your current operating system or system configuration. To resolve this issue, you can try the following steps: 1. Check System Requirements: Ensure that you meet the minimum system requirements specified by the Canon driver for your operating system. Check the driver's documentation or the manufacturer's website for compatibility information. 2. Verify Driver Version: Confirm that you have downloaded the correct driver version for your Canon photocopy and printer model. Drivers are specific to each printer model and may vary. Ensure that you have selected the correct driver for your exact model number. 3. Run Compatibility Troubleshooter: Right-click on the driver installation file and select "Properties." Navigate to the "Compatibility" tab and click on "Run compatibility troubleshooter." Follow the on-screen instructions to let Windows automatically detect and apply compatible settings for the driver installation. 4. Update Operating System: Make sure your operating system is up to date with the latest patches and updates. Sometimes, newer drivers require specific updates to be installed on your system. Check for updates using the built-in Windows Update feature or the update utility for your specific operating system. 5. Disable Antivirus/Firewall: Temporarily disable any antivirus or firewall software running on your system. Sometimes, security software can interfere with driver installations. Once disabled, attempt to install the driver again and see if the error persists. 6. Contact Canon Support: If the above steps do not resolve the issue, it is recommended to contact Canon's technical support for further assistance. They can provide you with specific troubleshooting steps or alternative driver options based on your printer model and operating system. Remember to download drivers only from official Canon sources or reputable websites to ensure their authenticity and avoid potential security risks.

Question edited for full make and model details.

Error Codes > Canon > iR2420 > Code E007-0000

PrintCopy .info https://printcopy.info > model=iR2420 Code: E007-0000; Description: Fixing film sensor failure. The fixing film sensor is faulty. Remedy: - Check the connector of the fixing film sensor.

There was a posting on Fixya 10 years ago about this very situation. Rather than repeat Luke E's answer, I offer the following link: https://www.fixya.com/support/t11685564-e_screen_canon_p23_dh_v The next answer on that page will direct you to another site where the suggestion is to press the reset button on the back of the calculator. Good luck.

Help here https://www.google.com/search?q=Canon+imageRunner+5075.+The+total+paper+tray+is+not+detected

1. ..

The Service Manual only mentions the Platen Motors, but follow the connections back to the control board and clean them with switch cleaner. Also look for any sensors that use the platen motors for functional logic decisions.

Canon imageFORMULA DR-X10C Service Manual page 164

ManualsLib https://www.manualslib.com > ... > Service manual View and Download Canon ImageFORMULA DR-X10C service manual online. ... E038. Platen motor. E040. Control PCB Sub-CPU communication failure. ..

The most likely reason is that the default paper size on PrintShop is set to the wrong size or page orientation..

Here is your manual. Check for paper jams. https://safe-manuals.com/user-manual/canon/mp18dii Normally the E error is caused by the printer being jammed. Press the C/CE button and check the roller with the numbers on it to be making a full turn. If it is not then try pushing the roller with the help of a rod or screw driver. The wheel should turn counter clockwise. If it is still jammed then you would need to take the unit for service to be opened and cleaned. ..

The error code E000021-0400 on a Canon C5240A typically indicates a problem with the fixing assembly temperature sensor. The fixing assembly is the part of the printer that fuses toner onto the paper, and it relies on a temperature sensor to ensure that the temperature is maintained within a certain range.

The specific error code E000021-0400 usually indicates that the temperature sensor has detected a problem with the temperature reading. This could be caused by a malfunctioning sensor, a problem with the wiring, or a problem with the fixing assembly itself.

To resolve this issue, you may need to replace the temperature sensor or the entire fixing assembly. However, before doing so, you can try resetting the printer by turning it off and on again. If the error persists, you may need to contact a qualified technician for assistance.

There could be several reasons why the font in your printed document is different than the font you selected in your Word document. Here are a few things you can check:

1. Printer Driver Settings: Make sure that the printer driver settings are set to print the document with the font you want. Check the printer driver settings to see if there is an option to "Use TrueType Fonts" or "Download Fonts". Enabling these options can help ensure that the printer is using the correct fonts.
2. Font Embedding: If you are using a custom font, make sure that it is embedded in the Word document. To check this, open the Word document, click on "File" > "Options" > "Save" and make sure that the "Embed fonts in the file" option is selected.
3. Font Compatibility: Some fonts are not compatible with all printers. Make sure that the font you are using is compatible with your printer. You can check your printer's user manual or manufacturer's website for more information on compatible fonts.
4. Printer Firmware: Check if there is a firmware update available for your printer. Updating the printer firmware can help resolve compatibility issues and improve print quality.

If none of these solutions work, you may want to consider contacting Canon's technical support team for further assistance. They can provide additional troubleshooting steps or help you identify any hardware issues that may be affecting the print quality.

There's a plastic flag that goes through an optical gate and tells the printer that the output tray is full. The flag is stuck, broken or missing, or the optical sensor is dirty. Search for the flag at the level where the paper would be if the tray is full.

• The error code "YE000025-0410" on a Canon 3320 printer typically indicates a problem with the paper feeding mechanism. This can be caused by a variety of issues, such as a paper jam, a misaligned paper tray, or a problem with the paper sensor.

To determine the exact cause of the issue, you may need to perform some troubleshooting steps. Here are a few things you can try:

1. Check for paper jams: Open the printer cover and check for any stuck or crumpled paper inside. Remove any paper that you find and close the cover.
2. Check the paper tray: Make sure the paper tray is properly aligned and that the paper guides are snug against the paper.
3. Clean the paper path: Use a lint-free cloth to clean the paper path of any dust or debris that may be causing the issue.
4. Reset the printer: Turn the printer off, unplug it from the power source, wait a few minutes, and then plug it back in and turn it on.

If these steps do not resolve the issue, there may be a problem with the printer's paper sensor or other internal components. In that case, you may need to contact Canon customer support or a certified repair technician for further assistance.

• Canon LBP5050 printer does not have a cartridge tray. Instead, it uses individual toner cartridges for each color (cyan, magenta, yellow, and black) that are inserted into specific slots inside the printer.

To replace a toner cartridge in the Canon LBP5050, follow these steps:

1. Make sure the printer is turned on and the front cover is open.
2. Locate the toner cartridge that needs to be replaced. Each cartridge is labeled with the corresponding color.
3. Hold the handle of the cartridge and gently pull it out of the printer.
4. Remove the new toner cartridge from its packaging and shake it gently to distribute the toner.
5. Remove the protective cover from the cartridge.
6. Hold the handle of the new cartridge and insert it into the corresponding slot in the printer.
7. Push the cartridge all the way in until it clicks into place.
8. Repeat this process for any additional cartridges that need to be replaced.

Once all of the toner cartridges have been replaced, close the front cover of the printer. The printer should automatically recognize the new cartridges and begin the toner replacement process.

The printer is the Canon MF4350D Super G3 based on E-bay listings. You can find the manual at the Canon support page: https://www.usa.canon.com/support/p/imageclass-mf4350d . There is a PDF Starter Manual, manuals for the drivers (also PDF) and an e-Manual that is in a .zip file. The e-manual is most likely to have the trouble-shooting information you need. I hope this helps. Cindy Wells

try running a Windows Update as you may need to catch up with who knows how many updates from Microsoft just type into search box bottom left corner of Windows desktop screen Windows Update also is the driver the correct 64 bit version for the IR 2520 rather than a 32 bit version.

Error E-000602-0020 on a Canon 2425 machine can indicate a problem with the machine's hard drive. It is possible that the hard drive has become damaged or corrupted, which is causing the machine to be unable to start up properly. There are a few different steps you can try to troubleshoot this issue:

1. Restart the machine: Try turning the machine off and then back on again to see if the error message clears.
2. Check the hard drive: Make sure the hard drive is properly installed and functioning. If the hard drive is damaged or not functioning properly, it can cause the machine to display an error message and not start up properly.
3. Check for any other visible issues: Inspect the machine and its components for any visible issues that may be causing the problem. This can include debris or foreign objects that may have gotten stuck in the machine, or damage to the machine or its components.

If you have tried these troubleshooting steps and the problem persists, it may be necessary to have the machine serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs. I hope this information is helpful. If you have any further questions or need additional assistance, please don't hesitate to ask.

1) Restart your system by clicking Start, clicking the power icon, and, then pressing Restart. Wait until the start screen of the computer appears. 2) Tap the delete or F2 repeatedly to enter the setup. Wait until the bios loads. The Setup Default option should be displayed. Choose the 'Load Setup Default' option and then click Enter. 3) Save your changes and ensure that the changes are as per your choices.