20 Most Recent Maytag Bravos MTW6600T Top Load Washer Questions & Answers


I u unplugged the machine and it stopped blinking, the lid unlocked but when I tried starting it again the same thing happened. I cleaned the contacts on the lock but that did not help.

Maytag Bravos... • Answered on Sep 23, 2019


This machine is equipped with technology that allows it to sense the load size and will use the appropriate amount of water for that load. Takes the guesswork out!

Maytag Bravos... • Answered on Dec 02, 2018


Most likely suspension rods and bushings need replacing. Also check outer tub ring. Sometimes it will break from beating on sides of washer, behind where water comes out.

Maytag Bravos... • Answered on Oct 01, 2017


Hi jbrundage1. I believe you have a UL error code on the washer. It means that the sensors in the washer are sensing the unit is unbalanced. When the washer is empty, set it to a spin or rinse and spin setting. Run the washer through the cycle empty, as it will help to remove any excess water in the tub. Also, make sure the washer is level, as it is balanced on springs, and that could be throwing the sensors off. I hope these suggestions prove helpful. Sincerely, Melanie, Maytag Social Media Representative.

Maytag Bravos... • Answered on Aug 18, 2017


revisit the drain pump and make sure that you have the small "O" ring seal properly installed between the housings otherwise replace the pump assembly

Maytag Bravos... • Answered on Jul 25, 2017


Maytag Bravos MTW6600T Top Load Washer Run ... - Fixya

www.fixya.com > ... > Maytag Bravos MTW6600T Top Load Washer
Maytag Bravos MTW6600T Top Load Washer, run diagnostic test cycle related issues. Get free help, solutions & advice from top Maytag experts.

Maytag Bravos MTW6600T Top Load Washer Run ... - Fixya

www.fixya.com > ... > Maytag Bravos MTW6600T Top Load Washer
Maytag Bravos MTW6600T Top Load Washer, run diagnostic test ccu related issues. Get free help, solutions & advice from top Maytag experts.

Maytag Bravos MTW6600T Top Load Washer Diagnostic ...

Maytag Bravos... • Answered on Dec 02, 2015


It is detecting a high current load when trying to turn the tub. Lift the top of the washer by using a putty knife and insert it between the top and front panels about 3 inches from each side, push in the clip and lift the top. You will find a tech sheet glued to the inside of the front panel in a plastic bag. Go to page 3 and look up your error code, it will refer you to page 4, test #3. I explains how to test the motor assembly.

Maytag Bravos... • Answered on Jul 28, 2015

Not finding what you are looking for?
Maytag Bravos MTW6600T Top Load Washer Logo

842 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Sheldon Dedek

Level 3 Expert

912 Answers

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Brad Brown

Level 3 Expert

18666 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Maytag Washing Machines

  • Maytag Washing Machines

Most Popular Question

maytag bravo making humming sound wont

  • Washing Machines
Loading...