20 Most Recent General Electric WJRE5500GWW Front Load Washer - Page 4 Questions & Answers

Hi from retired Englishman in SW France,

Unfortunately FixYa cannot provide manuals direct - members of the forum are just people from all over the world, probably working from home, and not representing any particular manufacturer ;-0)
Manual
You will need to type into your search engine/web browser '(make model number) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

An IH code means that the unit has detected a leak in the machine. Will have to find source of leak, and repair.

heater element or thermostat.........

First you take off the front cover of the Machine that is held in place by two clips at the top. then you look at the bottom of the frame assembly that holds the motor. You will find that when the Machine fills with water and clothes the tub drops way down!! and the frame rubs on the bottom pan of the washing Machine. My machine was new!!! and I made two Pads from the old washing machine feet and put them through the two holes in the frame and put a little grease on them and it works like it should GE your engineers should have seen this!!!!! Thank You FROM K.C.Morris God Bless America