BenQ DC C540 Digital Camera - Answered Questions & Fixed issues
When I try to
I guess that perhaps your memory card is an SD type. These cards have a little switch on the card that can write protect or "lock" it. Take the card out of the camera and check this switch. To unlock it, it should be moved towards the edge of the card which has the electrical contacts.
11/17/2010 9:59:37 AM •
BenQ DC C540...
•
Answered
on Nov 17, 2010
•
70 views
Where can i find an firmwareupdate for benq dc c850
Please.
When an electronic device is start acting strange, a software update is the worst thing you can try to solve the problem.
Updates are only allowed if the system is working without an error.
If it is not working correct, you can't be sure it will load the update correct and you never know what happens when the update is started.
For every update there is a condition, the electronic needs to work perfect and the battery / power supply must be capable of delivering enough power during the whole update process.
I'm sure there will be no update for the Benq camera.
7/27/2014 4:27:51 PM •
BenQ Cameras
•
Answered
on Jul 27, 2014
•
106 views
How to unlock locked card
SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.
5/13/2014 2:49:08 PM •
BenQ Cameras
•
Answered
on May 13, 2014
•
52 views
Camera hang
Always when your camera acts strange, switch it off. Wait a few seconds, till you are sure it is not accessing the memory anymore. Then remove the battery (ies). If possible first charge the battery (ies) Than replace the battery and switch on the camera. If the error comes back, you have to assume something serious is going on. In which you should contact a service centre or repair shop.
1/29/2014 12:30:58 PM •
BenQ Cameras
•
Answered
on Jan 29, 2014
•
63 views
Ok,please,help!I've just bought a BenQ
Make sure the card is not locked. Move the slide switch on the side of the card back and forth a couple of times ending with unlocked. Let me know the results.
5/8/2011 5:37:38 PM •
BenQ Cameras
•
Answered
on May 08, 2011
•
312 views
Every time i press the
Hi, the issue is with Batteries. Please replace the Batteries of same specification in order to use the Digital Camera. The Photos in the Memory Card is powered by USB as the Power Source from your Computer and not your Camera's Batteries. So please replace the batteries with new one.
5/9/2011 9:28:33 AM •
BenQ Cameras
•
Answered
on May 09, 2011
•
198 views
I can't download the pictures
Install the Software of your camera in the your laptop by using the CD which came with your camera...after that whenever you will connect this will work finely...
10/19/2010 3:42:37 PM •
BenQ Cameras
•
Answered
on Oct 19, 2010
•
98 views
Charging my BenQ DC E800
sir..i hav digit camera benq dc E800.when i start my cam it will displayed as black screen without light..if i take photo or vdo ,after took it shows with dim light and mixed with violet colour..plzz say whats the reasons and it can solve..where i want to go
9/4/2010 4:29:28 PM •
BenQ Cameras
•
Answered
on Sep 04, 2010
•
510 views
I have bought new hard drive of 160GB Seagate IDE.
At boot up press F2 to enter the BIOS. That is where the change has to be registered for your PC to recognize the new HDD. So when you get the first meny there you will find the HDD. If not, then auto detect the HDD. Within a second or two your new HDD will be recognized.
Also from the back of the new HDD. ie, the Seagate, check if the Seagate is the master. If not, then you will find a diagram there which tells you how to change the jumper so that your HDD will behave as master.
And I hope you are not using the other HDD as well?
11/1/2009 3:17:08 PM •
BenQ Cameras
•
Answered
on Nov 01, 2009
•
66 views
I have lost the software
Download all needed drivers from this link-- http://driverscollection.com/?file_id=19080
4/23/2009 5:23:45 AM •
BenQ Cameras
•
Answered
on Apr 23, 2009
•
337 views
Unlock
I have not used the trial version of Word 2007 before, but I am assuming that it's the fact it is a trial version it will not let you edit a previously saved Word doc.
What are the indicators/messages about not being able to edit the file. If a message pops up can you post it here verbatim.
Does the file contain a lot of formating - ie, the text has different fonts and sizes for headings and subheads and there are bullet pionts and graphics etc?? If not, are you able to copy all the text off the page and paste it onto another file and save that file - maybe as a text-only file with an extension ".txt". By doing this, you will be able to place that text, in an editable form, into nearly any application that supports text, including the full working "FREE" program OpenOffice.
Please let me know what you think of this and if there is more that we need to do to help you.
**.The best way to acknowledge contribution is to rate it's relevance.**
2/6/2009 10:56:34 AM •
BenQ Cameras
•
Answered
on Feb 06, 2009
•
292 views
Not finding what you are looking for?