Samsung CLX-3170FN All-In-One Laser Printer - Answered Questions & Fixed issues

Forget SmarThru. Download Samsung Universal Printer Driver 3. It must be version 3. Install that, make it your default printer and delete any other supposed Samsung printer drivers. When you go to Scan, the program should automatically download Samsung's Document Creator and this will work your fax simply and easily. Anyway, it works for me.

Hello! Here is the "MAINTAINING THE CARTRIDGE" for your device. Please check it, and "Troubleshooting" part as well. Hope it will help! https://manualsbrain.com/en/manuals/113019/?page=65

Could be the Software/firmware does not know the other commands that you printing software on computer are sending to it. Check the firmware on print server for any updates.

Paper has jammed In the fuser area (open back door to fuser area) or Check Inside around the toner cartridge

hi, please clean the printer lsu(laser scaner unit).its located under the printer ,you taken the papper tray & look the lsu is fixing the 3 screew please remoove the screew & connecter cable & then clean the lasu mirror & moter

check drum

You may download a copy of the manual at http://downloadcenter.samsung.com/content/UM/200910/20091026132451875/Guide_EN.pdf

The drum fills up with waste toner and you can empty it but its messy and you need to clean everything carefully after taking it apart. Take out the imaging unit, unloosen the screws on both sides, unmount the retainer springs and push the center pin out of the drum. Take out the drum and unscrew the two screws that were hidden behind the drum. Now take away all parts so that you can empty the waste drum container. Clean everything especially the light emitting panel, drum and white plastic cover needs to be clean. Hope this helps.

Same problem here. You two have solved?

I agree the fault is almost cetainly with the fuser unit.

In the Samsung CLX-3170FN manual you can find the reset procedures at page 64.
You can download the Samsung CLX-3170FN manual HERE.

Mantenimiento_ 75

There is an issue with fuser exit sensor on this printer. They will report false paper jams. A small part needs to be replaced to solve the issue.

Unless you have a miracle printer, you have learned a lesson that most of us with color printers have already learned :-) You don't

My education came with a Xerox fax machine with 11 mL ink cartridges. I was only using it for faxes, but the ink evaporates. It's long gone and I've never bought or recommended a color printer to do a black and white job.

Carl
.

1) It might be infected for real - avoid using this site anymore.
2) Your antivirus/security software might be mistaken. You can test your site's address in these 4 testing portals to make sure whether they are safe to use: http://www.makeuseof.com/tag/4-quick-sites-that-let-you-check-if-links-are-safe/

system error e 225

I had exactly the same problem.
The IP-adress on your printer may change if your printer or network router is switched off. Enter the printer network setup from your printer display and print a network konfugiration report, then go to your computer, open the printer properties from the control panel and check the port settings for your printer. If the ports IP-adress don't match the printers, you'll need to add a new port vid the same adress as your printer. Good luck...

Please have a look at the links below; each includes a short video to help explain the process. You should order an imaging unit to have on hand for replacement. At the end are included the product number for your consumables. Suggest you find a local supplier or seacrh on-line for a competive price or you can opt to puchase directly from Samsung.


How to replace the imaging unit on CLX-3170FN

http://ars.samsung.com/customer/usa/jsp/faqs/faqs_view_us.jsp?AT_ID=210811&PROD_ID=1093&PG_ID=-1&PROD_SUB_ID=0


How to redistribute toner

http://www.samsung.com/au/support/howtoguide/supportHowToGuidePopup.do?howto_guide_seq=2632&prd_ia_cd=06010100&map_seq=20418&regDt=20091028182505&page_gb=D&model_name=CLX-3170FN&type_ia_cd=06010000&subtype_ia_cd=06010500&row_index=


What to do when toner is empty on CLX-3170FN
http://ars.samsung.com/customer/usa/jsp/faqs/faqs_view_us.jsp?SITE_ID=41&PG_ID=0&AT_ID=210821&PROD_SUB_ID=0&PROD_ID=1093&EMAIL_ID=41


I could not find information specific to your model on the proper relacements for the imaging unit and toner cartridges; however, I was able to find a statement that the CLX-3170FN and CLX-3175FN are the same printer the main difference is just the colour of the unit. They should therefore use the same imaging unit and toner cartridges which I have listed below:

CLT-M409S Magenta
CLT-C409S Cyan
CLT-K409S Black
CLT-R409 Imaging Unit
CLT-W409 Waste Toner Collector
CLT-Y409S Yellow


Trust this is helpful. Please vote.

http://www.samsung.com/ca/consumer/office/printer-multifunction/colour-multifunction/CLX-3170FN/XAA/index.idx?pagetype=prd_detail&tab=support
Utilizar Google Translate, si desea convertir al espa?ol:
http://translate.google.com/?hl=en&tab=wT#

maybe 0000 or 1234