20 Most Recent Lexmark X2650 All-In-One InkJet Printer - Page 2 Questions & Answers

when you click print, select preferences and then paper layout, choose portrait or landscape there to change the print layout.

Try to check here: http://bit.ly/QxkTidOr look for this part number online: 21G0615

Improve the FixYa experience for everyone by voting.There are two things that I am going to suggest.

• Let Microsoft perform a diagnostic scan in three easy clicks. CLICK HERE
• Update your Lexmark firmware and drivers by CLICKING HERE

Try to re-seat your cartridges into the printer. If the error continues, try to do the Alignment function using the printer software on your computer.

1. On your computer, go to Start menu.
2. Go to Programs.
3. Go to Lexmark 2600 Series folder.
4. Select Lexmark Solution Center.

From the Maintenance tab, select Align Cartridges. Your printer will then print a page that will help align the cartridges.

Try to open the printer cover and remove all the cartridges. Then close the cover. Re-brick your printer by pulling out the power supply - the black box where the power cord is plugged into. Re-plug after 30 seconds. When the printer turns back on, re-insert the cartridges and check the problem persists.

Leading cause of paper jams is debris / foreign objects that accidentally fell into the paper feed area. Please try this approach to fix the problem:

1. Remove the sheets of paper from the feeder.
2. Grab a flashlight and look inside the feeder for any debris or foreign objects.
3. If you're willing and physically able, you may also carefully turn the printer over. Any debris should just freely roll out from the feeder.
4. If feeder is clear, place the printer on the table. Open the printer cover and remove the cartridges.
5. Check the cartridge area for any obstructions in the paper path.
6. Close the printer cover.
7. Re-brick your printer by pulling out the power supply - the black box where the power cord is plugged into. Re-plug after 30 seconds.
8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again to verify that the problem is fixed.

Please note that when inserting a refilled cartridge or when a cartridge is refilled, it can no longer register its ink level.

Hi,Welcome to FixYa.If you have lost/misplaced the installation disk, you can download the drivers and software from the Lexmark X2650 support website by clicking this linkOn the page which opens, click the "Complete drivers and software for setting up, configuring, and using your device with Windows 32-bit" link to open the download window. Then click the 'Download' button to start the download process.Hope this solves your problem. Thanks again.

That driver can be found at this webpage: http://support.lexmark.com/index?page=content&locale=EN&docLocale=en_US&segType=recommendedSegmentMICROSOFT&userlocale=EN_US&id=DR5214Simply click on the DOWNLOAD button, and the driver should begin downloading!Good luck!