Toshiba Satellite Pro L300 Notebook - Answered Questions & Fixed issues

Hello
OK, the link below will give you step by step instructions on how to play DVD's using your laptop. The link below will explain for Windows XP, if you have another operating system, you should be able to follow similar steps.

Click HERE.

Kind regards
Andrea

Using device manager uninstall, reboot and reinstall the wi fi chip. If this does not work you are in deep doo doo because the chip is fubar. I had the same issue with a Toshiba laptop but I returned it since it was a few days old. The chip is soldered to mo bo and unless you have real special tools and skills it cannot be removed.

If it is still within warranty, then take it back to the store. If not, you are better off finding a tech savvy person and have that person take the computer keyboard apart and clean it properly so the keys don't stick and actually lets go. If you have spilled anything sticky in it or used it with sticky fingers, it will most likely be the reasons for it to happen and in that case you have voided the warranty.

are you using vga out on notebook ?are you using vga in on projector ?Turn on projectorhold down function key on notebook when turned on - FN button and press F5 - cycle through each mode by releasing f5 and pressing F5 again till you get CRT or CRT + LCD (while keeping FN pressed ) on data projector input source should be computer or vga

Lexmark Phone Number.1-800-243-0019. Customer Service. unknown. 24 hours, 7 days Open. Press 1. Or our experts can wait on hold, and work to get your support.

I dont believe that laptop has an HDMI port on it. If you have an LCD TV then your TV may have a VGA or DVI input on it. You can connect your laptop to the TV by using a VGA to VGA or VGA to DVI cable. If you your TV doesn't have one of these input ports, then you're not going to get your laptop connected to your TV.

Insert boot able win 7 DVD and reboot, follow onscreen instructions..done

You have 2 options (purchase)
1. upgrade the win vista to win 7 - you need to check the type of win vista that you have if it is 32 or 64 bit or HOME BASIC HOME PREMIUM PROFESSIONAL ULTIMATE
home basic is not win 7 upgrade supported.

2. Win 7 OS full version disk.

Back up all of your files before doing anything on your computer.

Hi,

try using ActiveBoot suite v5.0.5, when turnig on your computer. This program will scan your computer and show u all the errors,missing files, wrong dll,...and repair them. It worked very well for me as I had a TROJAN virus on my Toshiba satellite 300 and couldn't even boot anymore.
After that try use the RegistryBooster tool witch solves every windows problems.

I hope this will help. Good luck :)

Your laptop should have a AVG port , run a cable from this to the HDMI port on the TV ,showing AVG port

Thats if you wantto give yourself a "hint, or "clue" in case you forget your password. say your password is "dog" as a hint, you would put "treat" so when you hear the hint, then you will be able to remember your password. :)

I do have all the drivers for the toshiba

IT SOUNDS LIKE YOU HAVE MAY HAVE DRIVERS OR IRQ THAT ARE CONFLICTING, TRY UNINSTALLING THE DRIVERS FOR YOUR WIRELESS MOUSE, AND REINSTALLING THEM, MAKE SURE THE WIRELESS MOUSE IS UNHOOKED BEFORE YOU REINSTALL THE DRIVERS.

I'd guess you've got the wrong password.

You can find the port number by going into the control panel. Find the device manager and look at the list of ports. Your network adaptor may not be using a port, just memory to access it, in which case under the network device it will have a resource tab showing the memory location.

I found this on the net, i hope this helps you out. It also says that this nasty virus is a tough one...and you still run the risk of ruining your info on the hard drive. Back-up critical info (Docs,Music, Game info etc)
And keep me posted on the results..i hope this helps you out! GOOD LUCK! 8-)


Step 1 : Use Windows File Search Tool to Find Zlob Path

1. Go to Start > Search > All Files or Folders.
2. In the "All or part of the the file name" section, type in "Zlob" file name(s).
3. To get better results, select "Look in: Local Hard Drives" or "Look in: My Computer" and then click "Search" button.
4. When Windows finishes your search, hover over the "In Folder" of "Zlob", highlight the file and copy/paste the path into the address bar. Save the file's path on your clipboard because you'll need the file path to delete Zlob in the following manual removal steps.

Step 2 : Use Windows Task Manager to Remove Zlob Processes

1. To open the Windows Task Manager, use the combination of CTRL+ALT+DEL or CTRL+SHIFT+ESC.
2. Click on the "Image Name" button to search for "Zlob" process by name.
3. Select the "Zlob" process and click on the "End Process" button to kill it.
4. Remove the "Zlob" processes files:
5. msmsgs.exe nvctrl.exe msmsgs.exe nvctrl.exe
   Read more about How to kill Zlob Processes

Step 3 : Use Registry Editor to Remove Zlob Registry Values

1. To open the Registry Editor, go to Start > Run > type regedit and then press the "OK" button.
2. Locate and delete the entry or entries whose data value (in the rightmost column) is the spyware file(s) detected earlier.
3. To delete "Zlob" value, right-click on it and select the "Delete" option.
4. Locate and delete "Zlob" registry entries:
5. HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsNTCurrentVersionWinlogonShell=explorer.exe HKEY_LOCAL_MACHINE SoftwareMicrosoftWindows NT CurrentVersionWinlogonShell=explorer.exe, msmsgs.exeHKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionRunRegSvr32=%System%msmsgs.exe HKEY_LOCAL_MACHINE SoftwareMicrosoftWindows CurrentVersionRunRegSvr32=%System%msmsgs.exe
   Read more about How to Remove Zlob Registry Entries

Step 4 : Use Windows Command Prompt to Unregister Zlob DLL Files

1. To open the Windows Command Prompt, go to Start > Run > type cmd and then click the "OK" button.
2. Type "cd" in order to change the current directory, press the "space" button, enter the full path to where you believe the Zlob DLL file is located and press the "Enter" button on your keyboard. If you don't know where Zlob DLL file is located, use the "dir" command to display the directory's contents.
3. To unregister "Zlob" DLL file, type in the exact directory path + "regsvr32 /u" + [DLL_NAME] (for example, :C\Spyware-folder\> regsvr32 /u Zlob.dll) and press the "Enter" button. A message will pop up that says you successfully unregistered the file.
4. Search and unregister "Zlob" DLL files:
5. uimcu.dll antzozc.dll dtjby.dll
   
   

Step 5 : Detect and Delete Other Zlob Files

1. To open the Windows Command Prompt, go to Start > Run > type cmd and then press the "OK" button.
2. Type in "dir /A name_of_the_folder" (for example, C:\Spyware-folder), which will display the folder's content even the hidden files.
3. To change directory, type in "cd name_of_the_folder".
4. Once you have the file you're looking for type in "del name_of_the_file".
5. To delete a file in folder, type in "del name_of_the_file".
6. To delete the entire folder, type in "rmdir /S name_of_the_folder".
7. Select the "Zlob" process and click on the "End Process" button to kill it.
8. Remove the "Zlob" processes files:
9. uimcu.dll antzozc.dll dtjby.dll dumpserv.com zxserv0.com vnp7s.net Protect RSA ncompat.tlb msvol.tlb hp[X].tmp msmsgs.exe nvctrl.exe dumpserv.com zxserv0.com vnp7s.net %UserProfile%\Application Data\Microsoft\Protect %UserProfile%\Application Data\Microsoft\Crypto\RSA ncompat.tlb msvol.tlb hp[X].tmp

Press Function Key and F5 to turn back on.

Try an older version of the driver

Microsoft.com downloads

There are 2 things that usually cause this. First is easy, get a can of compressed air and blow out the vents. The second is cause by viruses, in that case you'll have to find an expert in your area.