20 Most Recent
Questions & Answers
How can i get my images off of my camera if i don't have a cd
You don't need a CD -- You need a computer and a burnerAttach your camera to a computer via a download cable and save them to your hard drive until such a time that you have a CD/DVD burner and a CD or DVD disk then transfer them all to a CD/DVD
ESP 7250 Not printing the gray color on the test page
Not much to go on. If you mean the black cartridge is not giving any ink, and the printer does not say the cartridge is empty you still have a problem. But it is possible to solve.
If I'm guessing right, remove the cartridge with the black ink and look in the printhead. You see the little pipe sticking up, where the black ink is going in. with a dropper, just do a few drops of cleaning fluid on that pipe and replace the cartridge. Than let the printer print some black pages, till the black ink is coming through.
It also could be the cartridge with the black ink is empty or dried. If you shake (take care you will spray ink if you don't seal the ink outlet) and you don't hear any ink in the cartridge, unless what the computer or printer thinks it still is empty.
11/30/2021 5:11:18 AM •
14 hours ago
Photos are fuzzy. At the time it takes 52 picts. a round. Would they be sharper if I reduce the picts?
Photos are fuzzy due to many reasons and the main two reasons are that the subject is out of focus or the subject or the hand shake during the time of taking the snap.
Please make sure that you select appropriate picture modes (Macro, Portrait, Landscape etc..) when taking snaps. Make sure that when you press the click button half-a-way (known as AE mode), the subject is still in focus.
Try using a Tripod stand in case the hand is not steady or try increasing the shutter speed if its an SLR camera. That should help.
Let me know if that works.
11/30/2021 3:10:45 AM •
16 hours ago
How to connect Arlo camera with your wifi?
You can follow these steps to connect your Arlo Baby camera to a different WiFi network:
- Launch the Arlo app or log in to your Arlo account at myarlo.com
The Devices page displays.
- Tap or click Settings > My Devices.
A list of cameras displays.
- Tap or click Arlo Baby to select it.
- Tap or click Device Settings.
- Tap or click Wi-Fi Network.
The name of your currently connected WiFi network displays.
- Enter the new WiFi network name and password.
- Tap or click Continue.
- Follow the prompts to connect your Arlo Baby camera to the new WiFi network.
If you are using a mobile device, your settings are saved.
- If you are using a computer, click Save.
Your settings are saved.
- If you see the Renable Camera button on your Devices page, press and hold the Sync button on your Arlo Baby camera for 10 seconds.
- Wait two minutes.
You are able to stream from Arlo Baby again. If you do not want to wait two minutes, you can power cycle your Arlo Baby camera instead.
11/24/2021 6:31:02 PM •
on Nov 24, 2021
Stealth cam takes good day ,night are black. Battery are new
The infra-red source light must be inoperative. Bring it inside in a dark room and move around, look for the red light ring.
Mmmm, no glow IR emitters, clever that you can see them working or not, EXCEPT you can! Use the Selfie camera on your smartphone to look at the front of the stealth camera. IR light sources show as a red dot.
20 Megapixel Game Camera, 0. 6 Second Trigger Speed and 70 FT No Glo range. 720P HD Video, Video recording 5/15/30 seconds w/ audio. 24 No Glo IR Emitters, Six Quick Set Program Settings, Burst Mode 1-3 images per triggering. 5 -120 Sec recovery time out, Matrix Blur Reduction, 16: 9 Wide image ratio. Includes 8GB SD card, Operates on 8 AA batteries (not included).
11/24/2021 6:29:57 PM •
on Nov 24, 2021
Not finding what you are looking for?