20 Most Recent
Pulsar Mens Chronograph PQ2013 Watch - Page 8 Questions & Answers
Replace battery for PULSAR Y911. how ro start it?
To restart the watch, you have to short the battery with a pin that sits under a sticker on the back of the watch. The sticker is supposed to explain that. You can usually do it with a pair of sharp scissors or tweezers. Without "jumpstarting" the watch, just installing a new battery won't start the watch. (I don't know why.)
My mother has a fifteen
Did you check the watch battery? Pulsar watches run a long time! If a new battery does not start it up you can take a can of air and just squirt a little in the area where the battery goes (very gently) to blow out any dirt then install the battery and put back on. If it is still not working you need to take it to your local jewelry store to have an estimate for repair, usually 60.00 to 80.00. I hope this helps!
I have a very old
You can call a company called Coserv they are the main watch repair company for Pulsar. Many times the bezels are not available on the older watches but it is worth a phone call to see. Coserv is the repair service all jewelers use! Coserv in NJ 1-800-722-4452 hope this helps!!
I have the model PF-3547
You can call a company called Coserv give them the model number and ask them how to set the watch. They are the main repair company for Pulsar, and are located in NJ. Their phone number is 1-800-722-4452 tell them your local jeweler advised that you call! thank you!
Not finding what you are looking for?
