20 Most Recent Haier HDP18PA Stainless Steel Free-Standing Dishwasher - Page 9 Questions & Answers


HI Accumulated detergent from prior washings can cause problems with the soap dispenser. Buildup can get into the soap dispenser and interfere with the spring that triggers the flip-out tray, or it can slow down the pivot action of the tray. If the dispenser is not opening, first make sure you aren't loading the machine so dishes or pots and pans are touching the dispenser, and that dish racks aren't blocking the dispenser. Also check to make sure the dispenser tray isn't cracked. If leftover detergent in the tray is almost liquid, rather than just damp, the tray may be damaged.
If you can't solve the problem easily, replace the entire dispenser unit. This is usually easier than trying to disassemble it and replace separate parts. Use a new dispenser made for the dishwasher. The screws holding the dispenser in place may be on the front of the unit, or you may have to remove the front door panel to get to the screws and make the replacement. Remove the old dispenser and secure the new one, connecting it in the same way the old unit was attached.
THANK U,,,,,,,,,,,,,,,,,,

Haier... | Answered on Sep 12, 2008


does your manual have a trouble shooting guide? 3 beeps is a code but im unsure for what.

Haier... | Answered on Sep 01, 2008


Dear friend,
ngfam at you service! happy to assist!

Sounds like the drain at the bottom of the dishwasher may be clogged! Or the water line in has broken or sprang a leak from down below! Where was the water coming out of???????


Perhaps you should try service!
We sell appliances for 65 years and I recommend this nation wide Factory repair service!

Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!

Happy to assist you,
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF!

Haier... | Answered on Aug 29, 2008


Have you tried resetting the unit?

Haier... | Answered on Jul 24, 2008


You probably have heated dry option turned off

Dishwashers | Answered Yesterday


I had the same error. Unplugged it. No help. What I did that fixed it was to hold the start/pause button down for 3 secs. This then started the machine's cycle where it had been before the error. In my case about 30secs before the actual end.

I think the eroor was caused by opening the machine before it had actually finished it's cycle.

Dishwashers | Answered on Jan 13, 2021


All dishwashers are "direct drive", but some have one pump assembly and others have two - circulation/wash for one and drain for the other.

Laundry is another discussion.

Dishwashers | Answered on Jan 09, 2021


You can find info on that whirlpool dishwasher error code here
https://appliancerepairinfo.com/whirlpool-dishwasher-error-codes/

Dishwashers | Answered on Jan 04, 2021


Turn off at the breaker or switch for 5 minutes. Or you keep pressing Delay Start until it goes back to Zero.

Dishwashers | Answered on Jan 01, 2021


This may not be a problem. Your dishwasher can take 3 hours or longer to run depending on the cycle. Let it finish the cycle by itself.

Dishwashers | Answered on Dec 30, 2020


I read the user guide for this dishwasher and there are no error codes pertaining to the letter F. Please re-check the display on your dishwasher for correct error code.

Dishwashers | Answered on Dec 29, 2020


Regular eco should be enough even if tea coffee wine has dried, if light soiling then quick 30 would do.

Quick 30 is a main wash and dry program
Regular Eco is a pre wash, main wash, finalrinse, and dry program.

For delicate Chinaware and Cristal glass I would recommend rinse & hold. As a pre wash to loosen up debris and then wash by hand, to protect delicate glase and gold work.

Hope this was useful

Dishwashers | Answered on Dec 28, 2020


Not sure about a dishwasher but front loading automatic washers, fridges and the like are drawn out by opening the door and reaching and grasping whatever hand hold there is inside (the ledge of the door aperture) - if there is nothing to grasp then two people can stand, one either side. The person on the left lifts with the flat of his right hand and the other with his left hand...

Dishwashers | Answered on Dec 28, 2020

Not finding what you are looking for?
Haier HDP18PA Stainless Steel Free-Standing Dishwasher Logo

64 questions posted

Ask a Question

Usually answered in minutes!

Top Haier Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18562 Answers

Peter

Level 2 Expert

202 Answers

Are you a Haier Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Haier Dishwashers

  • Haier Dishwashers

Most Popular Question

hdw101ss not heat water

  • Dishwashers
Loading...