20 Most Recent Haier HTQ21JAAWW Top Freezer Refrigerator - Page 2 Questions & Answers

When it is off, gently shake the frig to see if the rattle is something in the frig hitting togrther. If that is not it it could be the compressor hitting the case inside due to a broken spring on the motor. The only repair for this is replace the compressor. In which case you let it run like that till it quits completely. That can be a very long time. Eric

im fridge freezer maken bubbleing noise

Hi

Poor cooling is often the result of a heavy frost build-up on the evaporator coils or a condenser that is clogged with dust, lint, and dirt.

Evaporator coils Poor cooling is often the result of a heavy frost build-up on the evaporator coils. You can't see these coils without removing a panel on the inside of your freezer. A sure sign that there is a build-up is the presence of any frost or ice build-up on the inside walls, floor, or ceiling of the freezer. Such a frost build-up usually indicates a problem in the self-defrosting system or damaged door gaskets.

The refrigerator is supposed to self-defrost approximately four times in every 24 hour period. If one of the components in the self-defrosting system fails, the refrigerator continues to try to cool. Eventually, though, so much frost builds up on the evaporator coils that the circulating fan can't draw air over the coils. There may still be a small amount of cooling because the coils are icy, but with no air flow over the coils, cooling in the refrigerator compartment is quite limited.

Here's an inexpensive, though inconvenient, way to determine if the problem is with the self-defrosting system. Remove all of the perishable food from the refrigerator and freezer, turn the thermostat in the refrigerator to Off, and leave the doors open for 24 to 48 hours. (Be sure to have several towels ready in case the melting frost and ice causes the drip pan to overflow). This allows the refrigerator to defrost "manually." When the frost and ice build-up has completely melted away, turn the thermostat back to a normal setting. If the refrigerator then cools properly, it indicates a problem with one of three components in the self-defrosting system:

• The defrost timer
  
  
• The defrost thermostat (also called the bi-metal switch)
  
  
• The defrost heater
  
  

If it still does not cool properly, there may be a problem with the refrigerant level or the compressor. You may need to consult with a qualified appliance repair technician to further diagnose the problem

Condenser Self-defrosting refrigerators all have a set of coils and a cooling fan, usually under the refrigerator, that need to be cleaned regularly. If these coils get coated with dust, dirt or lint, the refrigerator may not cool properly. The coils may appear to be a thin, black, wide radiator-like device behind the lower kick-panel. To clean them, disconnect the refrigerator from the power source, use a refrigerator condenser brush (see the Appliance Accessories section) and your vacuum cleaner to clean the coils of any lint, pet hair, etc. You may not be able to get to all of the condenser from the front, it may be necessary to clean the remainder of the condenser from the rear of the refrigerator.


Please revert for further assistance and Do rate the solution as "FixYa" if found useful.

Thanks
Rylee

i would call a plumber
it may be a big issue

my refridgerator seems to be workin the freezer is getting cold but not freezing its a top freezer bottom refridgerator the fan in the freezer is also not workin.i had atec come out to check it out. supposedly theres a capasitor that sits next to the compressor that he told me was bad an had to be ordered.its got 2 wires that come off the compressor that plug into this lil box.my question is could this be why my freezer is not freezing an also why the fan inside the freezer is not workin?

2 common problems that unit has. 1 is the cold controls go bad and will cause the unit to either run or not run. 2 the freezer drain gets blocked up very easy and when the freezer defrost the water has noplace to go but the freezer bottom and could block the air passages so the cold air will not satisfy the control. so check the freezer bottom by removing the plastic peice on the bottom there are 3 plastic plugs in the front that secure it and some phillips screw in the middle. you can just lift it to check for ice. if there is none replace the cold control. good luck

most likely its a defective thermostat,if your freezer is still working.Check to see if there is any ice build up.

It controls the compressor switching on and off.. https://www.google.com/search?q=haier+hbf130ss+wiring+diagram+pdf ..

Steve, Have checked around the web for parts..ie temp sensor, control board, which would cause your problem if defective, and there are no parts avalible. NUTS!

Ckecked around for the fan, parts for this unit are few and far between did locate some on ebay so head over there. Cuz there were quite a few but without seeing yours I couldn't match up what I was seeing.

If your Haier 10.5 model 10TG31SW refrigerator is not cooling, there could be a few different issues causing the problem. Here are a few things you can check:

1. Check the thermostat: Ensure that the thermostat is set to the appropriate temperature. If it is set too low, the fridge will not cool properly.
2. Check the condenser coils: The condenser coils may be dirty or clogged, preventing the refrigerator from cooling properly. Clean the coils with a brush or vacuum.
3. Check the door seal: Make sure the door seal is tight and not damaged. If the seal is not tight, cold air will escape and the refrigerator will not cool properly.
4. Check the evaporator fan motor: If the evaporator fan motor is not functioning properly, it could cause the refrigerator not to cool.
5. Check the compressor: If the compressor is not functioning properly, the refrigerator will not cool. It may need to be replaced by a professional.
6. Check the refrigerant level: If the refrigerant level is low, it can cause the cooling system to fail. This is a job that should be done by a professional with the right equipment and experience.
7. Check the defrost system: If the defrost system is not working properly, the evaporator coils will frost over and the refrigeration will not work.
8. Check the power supply: Make sure the fridge is properly plugged in and that the outlet has power.

Please note that it's also possible that there could be other issues causing your refrigerator not to cool, so it may be best to seek the help of a professional if the above steps do not resolve the problem.

It depends on the model of your Haier refrigerator. Many newer models of Haier refrigerators have a feature to disable the alarm beep when the doors are left open. To disable the alarm beep, you will need to check the user manual of your refrigerator for specific instructions on how to do this, as the process may vary depending on the model. Here are a few general steps that could help you to disable the alarm beep:

1. Look for a button or switch labeled "alarm" or "door alarm" on the control panel of your refrigerator.
2. Press and hold the button or switch for a few seconds until the alarm stops beeping. This should disable the door alarm.
3. In some models, you can disable it through the settings menu of the control panel, look for the alarm setting and turn it off.
4. Look for the manual of your refrigerator, it should have the information on how to do it.

If you can't find a way to disable the alarm beep, or you are not comfortable with following the instructions, it's best to contact the manufacturer or a professional for further assistance.

It sounds like the wire you're describing is the defrost thermostat. The defrost thermostat is responsible for controlling the defrost cycle of the refrigerator. The flat piece of metal with hooks at each end that you mentioned is likely the clip that attaches the thermostat to the evaporator coils in the freezer compartment. To reattach the thermostat, you will need to follow these steps:

1. Locate the evaporator coils in the freezer compartment. The coils are typically located in the back of the freezer.
2. Carefully place the hooks of the clip onto the evaporator coils.
3. Insert the metal prong on the end of the thermostat wire into the clip.
4. Ensure the wire is properly seated in the clip and that the clip is securely fastened to the evaporator coils.
5. Put back the cover panel of the freezer compartment
6. Check that the thermostat wire is not pinched or crimped and that it has enough slack to move freely.
7. Plug the refrigerator back in and turn it on.

It's important to note that working with the refrigeration system could be dangerous and it's always recommended to contact a professional if you're not comfortable with the task.

It sounds like your Haier deep freezer is having an issue with the compressor and cooling system. Here are a few things you can check:

1. Check the compressor: Make sure the compressor is running and not too hot to the touch. If the compressor is not running or is hot, it may be faulty and will need to be replaced.
2. Check the compressor's overload protector: The overload protector may have tripped, check to see if it is tripped and reset it if necessary.
3. Check the compressor's capacitors: They could be damaged and need replacing.
4. Check the evaporator fan motor: If the evaporator fan motor is not functioning properly, it could cause the freezer not to freeze.
5. Check the defrost system: If the defrost system is not working properly, the evaporator coils will frost over and the refrigeration will not work.
6. Check the thermostat: Ensure that the thermostat is set to the appropriate temperature. If it is set too low, the freezer will not freeze properly.
7. Check the power supply: Make sure the freezer is properly plugged in and that the outlet has power.
8. Check the clicking sound: If the clicking sound is coming from the compressor, it could be the compressor's relay switch, which is responsible for turning the compressor on and off. This could be the issue and will need to be replaced.

Please note that if a compressor is a sealed unit and you're not able to charge it, it's best to contact the manufacturer or a professional for further assistance.

If your 18 cubic foot Haier refrigerator is not getting electricity to the bottom fan, there could be a few different issues causing the problem. Here are a few things you can check:

1. Check the power supply: Make sure the refrigerator is properly plugged in and that the outlet has power.
2. Check the fan: Make sure the fan is not blocked or damaged and that it can turn freely.
3. Check the fan motor: If the fan motor is not working properly, it could cause the fan not to turn on.
4. Check the control board: If the above steps do not resolve the problem, the control board may be faulty and will need to be replaced.
5. Check the wiring: Make sure all the wiring is properly connected and not loose.
6. Check the thermostat: Ensure that the thermostat is set to the appropriate temperature. If it is set too high, the fan will not turn on.
7. Check the compressor: Make sure the compressor is running and not too hot to the touch. If the compressor is not running or is hot, it may be faulty and will need to be replaced.

If you are not familiar with any of these steps or if the problem persists after trying these solutions, it's best to contact the manufacturer or a professional for further assistance.

If your Haier PRCS25TDAP side-by-side refrigerator is dinging and you're unable to stop it, there could be a few different issues causing the problem. Here are a few things you can try to fix it:

1. Check the door: Make sure all the doors are properly closed and aligned. If the door is not closed properly, the refrigerator will think it's open and will continue to ding.
2. Check the door switch: Make sure the door switch is properly aligned and not damaged. The door switch is responsible for detecting when the door is open or closed and can cause the panel to malfunction if it is not working properly.
3. Check the control board: If the above steps do not resolve the problem, the control board may be faulty and will need to be replaced.
4. Check the settings: Make sure the temperature settings are correct and not accidentally changed.
5. Check the ice maker: If the ice maker is not functioning properly, it could cause the refrigerator to ding.
6. Check the water supply: If the water supply is turned off or clogged, the refrigerator will ding continuously.
7. Check the water filter: If the water filter is clogged, the refrigerator will ding continuously.

If you are not familiar with any of these steps or if the problem persists after trying these solutions, it's best to contact the manufacturer or a professional for further assistance.

It's possible that the compressor in your kegerator is shot and will need to be replaced. However, there are a few other things you can check before determining that the compressor is the issue.

1. Check the power supply: Make sure the kegerator is properly plugged in and that the outlet has power.
2. Check the thermostat: Ensure that the thermostat is set to the appropriate temperature. If it is set too high, the compressor will not turn on.
3. Check the compressor overload protector: The overload protector may have tripped, check to see if it is tripped and reset it if necessary.
4. Check the compressor's capacitors: They could be damaged and need replacing.
5. Check the evaporator fan motor: If the evaporator fan motor is not functioning properly, it could cause the compressor not to turn on.
6. Check the 3 in 1 starter: Make sure the 3 in 1 starter is working properly, it could be defective.
7. Check the wiring: Make sure all the wiring is properly connected and not loose.

If you have tried all above steps and the problem persists, it may be best to contact a professional or the manufacturer for further assistance. It could be the compressor, but it's better to confirm that before replacing it, as it's a costly repair.

If your Haier HRF15N3AGS refrigerator's electronic door panel is beeping and switching back and forth between 0 degrees and 37 degrees after the fridge door is opened, there could be a few different issues causing the problem. Here are a few things you can try to fix it:

1. Check the door switch: Make sure the door switch is properly aligned and not damaged. The door switch is responsible for detecting when the door is open or closed and can cause the panel to malfunction if it is not working properly.
2. Check the sensor: Make sure the temperature sensor is properly placed and not damaged. The sensor is responsible for detecting the temperature inside the refrigerator and can cause the panel to malfunction if it is not working properly.
3. Check the control board: If the above steps do not resolve the problem, the control board may be faulty and will need to be replaced.
4. Check the power supply: Make sure the fridge is properly plugged in and that the outlet has power.
5. Check the settings: Make sure the temperature settings are correct and not accidentally changed.

If you are not familiar with any of these steps or if the problem persists after trying these solutions, it's best to contact the manufacturer or a professional for further assistance.

It sounds like your Haier refrigerator is having an issue with the compressor and cooling system. Here are a few things you can check:

1. Check the thermostat setting: Ensure that the thermostat is set to the appropriate temperature. If it is set too low, the fridge will not cool properly.
2. Check the compressor: Make sure the compressor is running and not too hot to the touch. If the compressor is not running or is hot, it may be faulty and will need to be replaced.
3. Check the compressor overload protector: The overload protector may have tripped, check to see if it is tripped and reset it if necessary.
4. Check the compressor's capacitors: They could be damaged and need replacing.
5. Check the evaporator fan motor: If the evaporator fan motor is not functioning properly, it could cause the refrigerator not to cool.
6. Check the defrost system: If the defrost system is not working properly, the evaporator coils will frost over and the refrigeration will not work.
7. Check the power supply: Make sure the fridge is properly plugged in and that the outlet has power.

If you are not familiar with any of these steps or if the problem persists after trying these solutions, it's best to contact the manufacturer or a professional for further assistance.

If the ice tray in your Haier refrigerator is stuck and you're unable to release it from the fridge, there could be a few different issues causing the problem. Here are a few things you can try to fix it:

1. Check the ice maker arm: Make sure the ice maker arm is not stuck or broken. If it is, it will need to be repaired or replaced.
2. Check the ice maker mechanism: Make sure the ice maker mechanism is not jammed. If it is, try to unjam it by gently pushing or pulling on the tray.
3. Check the temperature: Make sure the freezer temperature is cold enough for the ice to freeze. If the temperature is too warm, the ice will not freeze properly and may become stuck in the tray.
4. Check the water supply: Make sure the water supply to the fridge is turned on and that the water supply valve is not closed or clogged.
5. Check the water filter: Make sure the water filter is not clogged. If the filter is dirty, replace it with a new one.
6. Gently try to move the ice tray by pushing or pulling, if it still won't come loose, it may be best to contact the manufacturer or a professional for further assistance.

Please note that some models of the refrigerator have a release lever, check the owner's manual to locate it.