20 Most Recent Robotoolz RT-7210-1G Robolaser, Self-Leveling, Remote-Controlled, Laser Le - Page 5 Questions & Answers

0helpful
3answers

Salter 9001 bathroom scale stopped working

Hi Pete. I don't keep receipts either : ^ )
No that I am done commeserating, try this. Remove the batteries. Use the eraser end of a common pencil to scrub and clean the battery contacts inside the battery compartment. Also pull the contacts a little closer to the surface if you can. Then reinstall the batteries and you may be up and running.
Please rate my answer as verey helpful thanks. Joe
3/6/2021 9:41:19 AM • Measuring Tools... • Answered on Mar 06, 2021
0helpful
2answers

Need a manual for a Wavetek DMM, digital multimeter model DM15XL

Here it is:
http://www.tequipment.net/pdf/Wavetek/5XL10XL15XL16XL_Manual_Rev_A.pdf
2/24/2021 7:47:11 AM • Measuring Tools... • Answered on Feb 24, 2021
0helpful
1answer

Change Location Digitech XC0366 weather station

Page 6 of the manual refers

DIGITECH XC-0366 USER MANUAL Pdf Download ...

www.manualslib.com > ... > Weather Station
Temperature Alert Setting: You can program your weather station to sound an alert whenever the outdoor temperature exceeds the upper or lower pre-set limit.
2/9/2021 10:34:51 PM • Measuring Tools... • Answered on Feb 09, 2021
0helpful
1answer

MD-3006SS Metal Detector will not tune

I had the exact same problem and after messing around with it for about half an hour I realized that the cord was the problem, I was kind of moving it around while plugged in and if I hold the end of the cord in a certain direction it works like it should. If the results are the same for you, I suggest either getting a replacement cord or just do the not so reliable option and tape the cord into place.
1/17/2021 2:00:27 AM • Measuring Tools... • Answered on Jan 17, 2021
0helpful
1answer

Code puk leica ts o6 plus numĀ° de serie 1368778

ask your phone company
1/13/2021 8:10:59 PM • Measuring Tools... • Answered on Jan 13, 2021
0helpful
1answer

Sokkia total station 610 Error 205 how to rapair

What is 'rapair'?
1/13/2021 8:48:18 AM • Measuring Tools... • Answered on Jan 13, 2021
0helpful
1answer

Sharp Atomic Clock SPC-373. The outdoor sensor on Model spc373 not working

It is a known issue Try first a general reset: - remove the batteries from the clock (thus turning it Off.) - remove the batteries from the outside sensor (if you are not aware that it has batteries, then perhaps it is not working because the batteries are no good any more! check that also.) - wait 10 minutes with no power to the device. - put batteries back in, power On again. - hit Reset. - hit Receive button. - change the channel for reception from the outside sensor. - change the channel on the outside sensor to match that channel. - then set the time once more, once the remote temperature is sensed once again. If this does not get the outside temperature reading working again, you may have to replace that temperature sensor. https://www.google.com/search?q=Model+spc373 ..
1/2/2021 6:59:45 PM • Measuring Tools... • Answered on Jan 02, 2021
0helpful
1answer

How to connect indoor station with outdoor station audio door phone digitech bpsdp3206a

It is a wired system (outside unit to the indoor phone) and only available in South Africa. This seems to be the distributor and there is no manual online. The are far better systems with colour video, audio and wifi or bluetooth. https://www.game.co.za/game-za/en/All-Game-Categories/DIY-%26-Auto/Home-Security/Intercoms-%26-Alarms/Alarms-%26-Sensors/Digitech-Wired-Door-Phone-BPSDP3206A/p/504101-EA ..
12/30/2020 5:03:00 AM • Measuring Tools... • Answered on Dec 30, 2020
0helpful
1answer

My model 1099 stopped displaying despite battery changes for the indoor and outdoor sensors. How do I get it to display again. After all these years of satisfactory use.

Try removing all batteries, then reinstalling in the outdoor unit and waiting for it to start sending data before reinstalling batteries in the indoor unit. If you don't see data displayed on the indoor unit, the outdoor unit may have failed.
12/24/2020 3:36:30 AM • Measuring Tools... • Answered on Dec 24, 2020
0helpful
1answer

Sokkia PL 100 pipe laser showing error code

Hi I know it is 2 years too late but I thought I would write the solution for otherspress the up the down and the on/off but all together after a few seconds CAL 3 will appear and the lser turns off.turn the laser back on again and it should be reset to 0.00 procent-you need to calibrate the laser now using the same methodhope this helps Dale
12/22/2020 10:54:22 AM • Measuring Tools... • Answered on Dec 22, 2020
0helpful
1answer

Hello , I have a problem with total station sokkia set 650rx . shows error E097 & E031. How to solve it . ans plz

Those are precision devices and require factory check up and calibration at regular intervals. Contact your dealer.
8/1/2020 4:32:52 PM • Measuring Tools... • Answered on Aug 01, 2020
0helpful
2answers

Need a manual and battery type for Micronta Pocket Digital Multimeter, part 22-169

Please contact a radio shack for this info.
7/7/2020 11:53:25 PM • Measuring Tools... • Answered on Jul 07, 2020
0helpful
2answers
0helpful
1answer

Hi where can I purchase outdoor sensor for Auriol IAN 37966 weather station Thanks Mal

From : ebay.com amazone.com
5/18/2020 2:58:59 PM • Measuring Tools... • Answered on May 18, 2020
0helpful
1answer

Acurite I do not have an a b c sensor on my indoor units only outside so will no sync up

Reset display by pressing the RESET button, located on the back of the display unit inside the battery compartment. Date and time will need to be entered after a reset. Flashing of the outdoor temperature is generally an indication of wireless interference. https://www.acurite.com/media/manuals/00754-instructions.pdf Hard Reset:
  1. Bring both the sensor and display unit together and power down by removing at least one battery from each and/or removing the power cord.
  2. Make sure the A-B-C switch on both units matches. ...
  3. Reinstall the battery in the outdoor sensor.
  4. Reinstall batteries and/or power cord into the display unit
https://support.acurite.com/hc/en-us/articles/360013641694-3-in-1-Reset
4/29/2020 9:01:40 PM • Measuring Tools... • Answered on Apr 29, 2020
0helpful
4answers

Which tool should I used at the time of moving?

You may use following removals Tools
  • Moving Dollies
  • Pallet jacks
  • Hand Trucks
  • Hydraulic Tools
You may also get information about Removals Tools HereRemoval Companies Tools
4/24/2020 7:07:01 AM • Measuring Tools... • Answered on Apr 24, 2020
0helpful
1answer

Model 06004RM outside temperature stuck. Did a hard reset with fresh lithium batteries. Still not working. Really frustrated.

https://support.acurite.com/hc/en-us/articles/360007555574-Temperature-is-Flashing-Stuck-or-Showing-Dashes-on-a-Basic-Multi-Sensor-Display-
4/22/2020 6:03:17 PM • Measuring Tools... • Answered on Apr 22, 2020
Not finding what you are looking for?
Robotoolz RT-7210-1G Robolaser, Self-Leveling, Remote-Controlled, Laser Le Logo

37 questions posted

Ask a Question

Usually answered in minutes!

Top Robotoolz Measuring Tools & Sensors Experts

ADMIN Canada
ADMIN Canada

Level 3 Expert

43300 Answers

ray gallant

Level 3 Expert

74102 Answers

 Mikey
Mikey

Level 3 Expert

6732 Answers

Are you a Robotoolz Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Robotoolz Measuring Tools & Sensors

  • Robotoolz Measuring Tools & Sensors

Most Popular Question

dropped rt7210 1 bearings out laser

  • Measuring Tools & Sensors
Loading...