Top 20 Stanley 77 500 Intellilaser Pro Stud Sensor & Laser Level Questions & Answers


Try using a magnet instead. Move the magnet back and forth against the wall, slowly... until it sticks to one of the ferrous screws hidden in the sheetrock. These hidden screws are holding the wall board/sheetrock onto a stud.
Magnets! Free stud finder! and no batteries to replace!

Stanley 77 500... | 1,269 views | 0 helpful votes


Here's is a link to the manual for download - direct from Stanley.
Good luck!

Stanley 77 500... | 740 views | 0 helpful votes


A manual may be found at this link....click on search knowledge base and enter "77-500 intellilaser". You will be given the option of downloading the manual.
http://www.stanleytools.com/default.asp?TYPE=STATICLEFT&PAGE=knowledgebase.htm&LEFT=left_knowledgebase.htm
Take care....hoped this fixedya!

Stanley 77 500... | 1,588 views | 2 helpful votes


purchase a new one,return it and keep the manual

Stanley 77 500... | 157 views | 0 helpful votes


you can find manuals for power tools such as the stud sensor at http://powertool.manualsonline.com/

Stanley 77 500... | 425 views | 0 helpful votes


I downloaded a manual for my Bostitch (stanley) framing nailer yesterday from their webpage. You should be able to find one somewhere on stanleys home page.

Stanley 77 500... | 1,494 views | 2 helpful votes


BUY A CAN OF PENETRATING OIL AND SPRAY IT DOWN GOOD AND SOAK IT OVER NIGHT

Stanley... | 19 views | 0 helpful votes


TAKE IT BACK TO THE DEALER

Stanley... | 161 views | 0 helpful votes


WHY HAVE YOU NOT TRIED IT TO FIND OUT FOR YOURSELF .

Stanley... | 161 views | 0 helpful votes


here is the website:
https://www.stanleytools.com/products/hand-tools/flashlights-lighting/spotlight/waterproof-led-rechargeable-spotlight/fl5w10
and they say the warranty is 1 year:
Warranty
1 Year Limited Warranty
The manufacturer, Baccus Global warrants products against defects in materials and workmanship for a period of ONE (1) YEAR from the date of retail purchase by the original end-user purchaser ("Warranty Period").
If there is a defect and a valid claim is received within the Warranty Period, the defective product can be replaced or repaired in the following ways: (1) Return the product to the manufacturer for repair or replacement at manufacturer's option. Proof of purchase may be required by manufacturer. (2) Return the product to the retailer where product was purchased for an exchange (provided that the store is a participating retailer). Returns to retailer should be made within the time period of the retailer's return policy for exchanges only (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges. Please call 1-877-571-2391 for more information or return instructions.
This warranty does not apply to accessories, bulbs, fuses and batteries; defects resulting from normal wear and tear, accidents; damages sustained during shipping; alterations; unauthorized use or repair; neglect, misuse, abuse; and failure to follow instructions for care and maintenance for the product.

O
Otherwise, check with the seller who sold it to your wife - If they are unwilling, and more companies seem to be going this route, go to the Manufacturer

Stanley... | 176 views | 0 helpful votes


TRY STANLEY WEBSITE OR ASK GOOGLE

Stanley... | 1,042 views | 0 helpful votes


I have just read the device instructions and although the device offers usb charging or power up to half an amp it does not and cannot communicate digitally...

Stanley... | 213 views | 0 helpful votes


Yes. Unless one was provided the standard is to just use an extension cord.

Stanley... | 172 views | 1 helpful votes


Google (Stanley)(FMHT73570)(manual) without parens for instructions.

Stanley... | 400 views | 0 helpful votes


You will have to buy charger for Stanley fatmax 700 it will cost you around 12$ to15$. You can buy it from any online shopping website like eBay or any other.

Stanley... | 324 views | 0 helpful votes

Not finding what you are looking for?
Stanley 77 500 Intellilaser Pro Stud Sensor & Laser Level Logo

28 questions posted

Ask a Question

Usually answered in minutes!

Top Stanley Measuring Tools & Sensors Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Frank Walton

Level 1 Expert

26 Answers

Are you a Stanley Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Stanley Measuring Tools & Sensors

  • Stanley Measuring Tools & Sensors

Most Popular Question

instruction manual

  • Measuring Tools & Sensors
Loading...