20 Most Recent Stanley 77 500 Intellilaser Pro Stud Sensor & Laser Level - Page 7 Questions & Answers


satreece,

The only location that you can get service for the Stanley COMPULEVEL is from Technidea Corporation. A standard factory recharge for the Stanley COMPULEVEL 35-100 Elevation Measurement System is $150.00 and includes a thorough evaluation, R&R of the liquid, recharge of the pressurizing gas, testing, cleaning and repackaging, and complimentary return shipping via UPS Ground to all locations in the US and Canada.

An electronics upgrade is also available for your COMPULEVEL, allowing 2X faster and 3X more accurate measuring and significantly more stable readings. COMPULEVEL upgrades start at $195.00, plus the cost of the standard recharge.

For detailed instructions on how and where to send your COMPULEVEL for service, please visit www.ziplevel.com and click on the 'Service' tab at the top of the page. If you would like to upgrade your COMPULEVEL, please include a brief note with your unit when you send it in for service.


Contact information for Technidea is below.



800.805.LEVEL
760.480.4740 Office
760.480.4738 Fax
[email protected]
www.ziplevel.com

Stanley... | Answered on Jul 17, 2009


The level is meant for 360* of USE not from one single position check both horizontal and vertical... I think that one is a Moveable

Laser? Level?
OH I just found .. is it on a tripod like attachment? there should be a small round "level" on the physical Base of the level itself .... (like the ones your drill would have for drilling down into the floor boards) You must level it that way First.... then you can use it ...

Stanley... | Answered on Oct 26, 2008


You can try the following: 1# Check the main power cable & make sure it has 110V (Do not run the machine with long extension cable).2# Check all harness connection.3# Check keyboard cable connection on back of control board.4# If all the cable connection is good then you may need to replace the control board.

Measuring Tools... | Answered Yesterday


Those are precision devices and require factory check up and calibration at regular intervals. Contact your dealer.

Measuring Tools... | Answered Yesterday


Contact Acurite directly to inquire.

Measuring Tools... | Answered on Jul 04, 2020


Contact LaCrosse direct. We are FIXYA dot com


Wireless Thermometer - La Crosse Technology

www.lacrossetechnology.com > media > catalog > product

PDF This Wireless Thermometer features: indoor/outdoor temperature with MIN/MAX readings in Fahrenheit or Celsius, outdoor temperature trend arrow, and manual ...

Measuring Tools... | Answered on May 07, 2020


First, insert the new batteries into the Temperature sensor. (see "Install and replace batteries in the Temperature sensor").
2.
Immediately after and within 30 seconds, insert the batteries into Weather station (see "Install
and replace batteries in the Weather station"). Once the batteries are in place, all segments of
the LCD will light up briefly. Following the time as 12:00 and the "Weather man" icon will be
displayed. If these are not displayed after 60 seconds, remove the batteries and wait for at least
10 seconds before reinserting them.
3.
After inserting the batteries, the Weather station will start receiving data from the sensor. The
outdoor temperature and the signal reception icon should then be displayed on the Weather
station. If this does not happen after 3 minutes, the batteries will need to be removed from both
units and reset from step 1.
4.
In order to ensure sufficient 915 MHz transmission however, this should under good conditions
be a distance no more than 100 meters between the final position of the Weather Station and the
sensor (see notes on "Mounting" and "915 MHz Reception").
Note:

If the signal reception is not successful on the first frequency (915MHz) for 45 seconds, the
frequency is changed to 920MHz and the learning is tried another 45 seconds. If still not....

and about the Sad Face

Comfortable:A happy face icon "(68°F to 78.6°F)and relative humidity reading between 45% and 65%.Uncomfortable:A sad face icon " " indicating any value outside the comfortable range

https://www.manualslib.com/manual/516303/La-Crosse-Technology-Ws-9630u-It-Ca.html?page=7#manual

Measuring Tools... | Answered on Apr 29, 2020


Reset display by pressing the RESET button, located on the back of the display unit inside the battery compartment. Date and time will need to be entered after a reset. Flashing of the outdoor temperature is generally an indication of wireless interference.
https://www.acurite.com/media/manuals/00754-instructions.pdf
Hard Reset:
  1. Bring both the sensor and display unit together and power down by removing at least one battery from each and/or removing the power cord.
  2. Make sure the A-B-C switch on both units matches. ...
  3. Reinstall the battery in the outdoor sensor.
  4. Reinstall batteries and/or power cord into the display unit
https://support.acurite.com/hc/en-us/articles/360013641694-3-in-1-Reset

Measuring Tools... | Answered on Apr 29, 2020


You may use following removals Tools
  • Moving Dollies
  • Pallet jacks
  • Hand Trucks
  • Hydraulic Tools
You may also get information about Removals Tools Here
Removal Companies Tools

Measuring Tools... | Answered on Apr 24, 2020


https://support.acurite.com/hc/en-us/articles/360007555574-Temperature-is-Flashing-Stuck-or-Showing-Dashes-on-a-Basic-Multi-Sensor-Display-

Measuring Tools... | Answered on Apr 22, 2020


Take it apart and get some isopropyl alcohol and a q-tip. check for corrosion around the terminals. If there is none, look for loose connections. If there is something loose, check if a bit of the board is loose. If a bit of the board is stuck to the terminals, give up on batteries.

Measuring Tools... | Answered on Apr 22, 2020


I do not believe that you can buy these separately. They are factory programmed and paired together.

Measuring Tools... | Answered on Apr 09, 2020

Not finding what you are looking for?
Stanley 77 500 Intellilaser Pro Stud Sensor & Laser Level Logo

28 questions posted

Ask a Question

Usually answered in minutes!

Top Stanley Measuring Tools & Sensors Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Frank Walton

Level 1 Expert

26 Answers

Are you a Stanley Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Stanley Measuring Tools & Sensors

  • Stanley Measuring Tools & Sensors

Most Popular Question

instruction manual

  • Measuring Tools & Sensors
Loading...