20 Most Recent Fossil JR8096 Wrist Watch - Page 2 Questions & Answers

you can go to fossil.com and they have a repair site for like thirty bucks you can pay to have any parts repaired guess thats what i will have to do to get a replacement band for my own.

mcdevito75 here, Look for a small watcg repir shop in your area. It could be the mechanism is going bad. If you changed the battery for this problem and you have the same problem, then the quartz is ging bad, (the mechanism)

mcdevito75 here, Just had the battery changed, if the watch was running fine before the last battery died, and now with this battery change the watch can"t keep time, try another battery as any Battery can be weak just from storage.

i think it pretty much pulls right out, the kid at walmart did it rather quickly.

s u take a nuon battery and go to noun and say pronoun and he will laugh at you how foolish u are hahahaha

just fart on the watch

The big tic has two batteries. The battery for the display may need to be changed and the circuit reset. You can then hold the display button down for 2.5 seconds to cycle through the display function.

There is another battery in your watch. One for movement, another for background. You have to replace background battery.

Check the sides of watch band and you will see the pin ends. They are holding all links together. If there are arrows inside the watch band, they are pointing the way the pins must come out.
To shorten the band you have to:
Extract the pins.
Take link(s) off.
Join the rest of band together and drive pins back.

go to web site they should have directions there

The watch is scrolling through the seconds, and is not something that needs to be set. If there is a bottom it is only there to change the way the seconds are scrolling? There are many different types of these, but most are just standard seconds.

I finally got mine adjusted by pressing the top right button (time) and the "pin" button (bottom left) at the same time. The numbers should start flashing then you can let go of the "pin" button and adjust the time. Hope that helps. Date button works the same way.