Hobart D300 Stand Mixer - Page 8 - Answered Questions & Fixed issues
Large Hobart mixer, leaking oil?
* Model? Check side plate or post picture so I can check.
* Usually leaks are at the bearing seal(s). Replace.
* Frequent seal changes (less than 1-3 months). Replace bearings and seals.
* Check shaft near bearing seals for pitting (rust) that will damage seal. Remove and have a machine shop refurbish part. If possible; replace whole part and bearings. (or rebuild gear box.)
* Call your Hobart service rep for a quote.
* Check and replace lost oil as needed until machine is rejected (inspector, quality control, maintenance, etc.) Be careful oil does not get into food product.
Aloha, ukeboy57
7/2/2018 12:14:28 AM •
Hobart Food...
•
Answered
on Jul 02, 2018
•
1,372 views
How to remove hobart dough hook
The reverse of how you put it in. Look at the other attachments and is should be pretty obvious. Sounds like it might be a bit gummed up, do be frightened to be a lottlemheavy handed with it
5/28/2018 9:15:03 PM •
Hobart Food...
•
Answered
on May 28, 2018
•
1,449 views
Hobart A200 Mixer - what exactly should the grease look like?
The grease is a toffee colour when new. It shouldn't fill the cavity completely. The older a200 mixers are usually very reliable, they need the fiber gear replacing every now and then, other than that it will run on. I've seen some out there that are almost 50 years old and going strong
5/31/2018 9:43:08 AM •
Hobart Food...
•
Answered
on May 31, 2018
•
697 views
I have a Hobart kitchen aid mixer and I need a Manuel for it.
Hello, Fran -
The Whirlpool Corporation purchased the Hobart Kitchen Aid manufacturing unit in 1985.
I suggest you contact the Whirlpool Corp. directly and ask about the availability of a copy of a user manual for your model of Hobart mixers. Whirlpool probably took over the Hobart Kitchen Aid archival records. With luck the manual you need is still in the company archives.
This is the link to the Whirlpool Corp. Contact Us page:
https://www.whirlpool.com/services/contact-us.html
Best wishes.
3/29/2018 5:05:03 PM •
Hobart Food...
•
Answered
on Mar 29, 2018
•
289 views
Dear Sir,
surely there are mechanic shops and auto spares shops that sell belts in malta
take your belt as a sample and get on e the same
1/7/2018 9:57:31 PM •
Hobart Food...
•
Answered
on Jan 07, 2018
•
166 views
Shifting on my Hobart N-50 mixer. I just pulled the switch/shift cover. yellowish-brownish grease in places, but a few gears looked dry. Tried shifting / no success.
You are in for an adventure. The first step is to find the N-50 Service Manual online and download it.
Trouble shifting speeds is rarely a simple matter of lack of grease.
If your mixer shifted before removing the switch plate, then there is a post that shift lever engages which in not being engaged properly.
On the other hand, if that is not the problem, the transmission case must be removed. Shifting gears involves moving the tumbler yoke assembly. If you are extremely lucky the yoke's spring has become detached and re-attaching it will be all that is needed.
Of course the spring will be in place and you will have to deal with all the grease and investigate the cause.
This is a good time to replace the old grease as well.
9/26/2017 5:21:24 AM •
Hobart Food...
•
Answered
on Sep 26, 2017
•
294 views
Not finding what you are looking for?