Jura Capresso 565.03 Electric Burr Grinder - Page 9 - Answered Questions & Fixed issues
Saeco Brew Unit: How to realign the gear?
Saeco XSmall : Cannot put brew group back in... Turns out the drive gear in the main machine is mis-aligned. This can happen if you try to remove trays or open the service door while the machine has not "finished" a brewing cycle (coffee may be done, but the machine is not!). Confirm this by looking at the drive shaft. It has 5 splines, and two are much wider than the other 3. Those wider ones should be on the top--if they are in any other position, then it does not match the "neutral" position in the brew group and the brew group cannot be inserted. Unless there is something else wrong, the machine will re-align itself during the power-on self-check, but in order to trigger the self-check, you have to fool it into thinking that all the trays, etc. are installed (essentially, bypass all relevant microswitches). This doc has some details and pictures of what to look for: https://www.coffeetico.com/SAECO_pdf_files/BrewGroupRemoval.pdf. For the XSmall, leave the brew group out, shut the service door and put the grounds bin in. Also, make sure the water bin and drip tray are in as normal. This is enough for the XSmall to startup. Turn the machine on and as it does its self-check, the gears get re-aligned properly. It will eventually figure out the brew group is missing and start flashing red--turn the machine off at that point. Verify that the two wide splines are at the top. The brew group should now slide in easily.
Keurig milk frother won't turn on
If you have positioned the frother properly and there is an adequate amount of milk and the frother still not working then there might be some kind of damage to the internal parts of the machine.
You can buy replacement parts for Keurig frother easily online. Read
this article for further details.
It has error 8 on it what do u think?
Jura Capresso Impressa E8 Espresso/Coffee Maker Error 8 ...
www.fixya.com > ... > Jura Capresso Impressa E8 Espresso/Coffee Maker
Jura Capresso Impressa E8 Espresso/Coffee Maker, error 8 related issues. Get free ... We have just done a full disassembly, cleaning, and relube of our Jura Z5 ...
Bosch Benvenuto B30 Espresso/Coffee Maker Error 8 ...
www.fixya.com > ... > Bosch Benvenuto B30 Espresso/Coffee Maker
Not finding what you are looking for?