20 Most Recent
Bowflex Treadclimber - Page 2 Questions & Answers
Treadclimer slows down but speed readout does not change.
I think the problem on that is only the pedal sensor.
The sensor will count your every steps. And it will also read the distance of your workout.
If the sensor is damage you can't get any readings of your steps. If that the case you need to replace new sensor.
3/18/2015 2:22:32 PM •
Bowflex...
•
Answered
on Mar 18, 2015
UNIT NOT UP TO SPEED, LUBED TREADLES, THEN
Steps you should to to find the exact problem.
first, lubricate the treadmill. Use it. and when the problem come up. Turn off the treadmill, open the motor hood, Touch the drive motor, if the drive motor is supper hot. The drive motor is shorted. The burning smell is came from it.
you need to replace or rewind drive motor.
7/3/2014 12:56:08 AM •
Bowflex...
•
Answered
on Jul 03, 2014
What is the problem with treadclimber malfunction 84 u 1.1?
Try to run the treadmill @ 10kph. W/o using it. If the problem comes up. The problem is only the speed sensor..
and if the treadmill is in normal condition with out someone using it. @ 10kph. The problem is only lack of lubrication. You need to lubricate the treadmill before you using it. To prevent the motor from breakdown.
6/11/2014 1:33:23 AM •
Bowflex...
•
Answered
on Jun 11, 2014
Why is there a clicking noise coming from beneath walking belt?
because your belt has dirt on both end part of the underneath of running belt. to remove that noise you need to clean it by using a clean wet towel. scrub it until all the dirt would remove. dry it and its done. you can now use your treadmill
5/2/2014 1:14:29 PM •
Bowflex...
•
Answered
on May 02, 2014
Not finding what you are looking for?