20 Most Recent
Endurance TF3i Folding Treadmill - Page 3 Questions & Answers
Treadmill has lines accross the display
Dear SIR:You have possibles cause: 1) Tight the flexible cable or ribbon very well 2) Tight the connector from display board vs lower board 3)Try to clean with spray contact cleaner from Radio Shack the contact for corroded contact.4) adjust the Reed switch see the diagram 5) Try to RUN the software calibration for easy diagnose and troubleshooting 6) See my personal TIPS for HELP 7) IF the problem persist you have problem with the EPROM or faulty display board.sincerely. God bless youernesto cuadramanagua, nicaragua. c.a.
4/5/2012 11:16:33 AM •
Endurance...
•
Answered
on Apr 05, 2012
The treadmill keeps shorting out
I suspect it is because of the circuit you are using.
Please check your treadmill's manual and see how much power it needs.
If you dont have the user manual with you, no prob just look at the nameplate on your treadmill.
Most treadmills demand a dedicated circuit.
Since it is not working at all Please change the circuit.
I faced the similar problem few days back.
3/15/2011 5:35:22 AM •
Endurance...
•
Answered
on Mar 15, 2011
I need assembly instructions for wynne home gym.
Please check this link:https://www.google.com/search?sxsrf=ALeKk02D68ibDlpmqPFTdJFsPUAG8G7Hqg%3A1609823462652&source=hp&ei=5vTzX9vmJfG4mAXst4l4&q=assembly+instructions+for+wynne+home+gym&oq=assembly+instructions+for+wynne+home+gym&gs_lcp=ChFtb2JpbGUtZ3dzLXdpei1ocBADMgQIIxAnOgcIIxDqAhAnUIwSWIwSYPUXaAFwAHgAgAHwAYgB8AGSAQMyLTGYAQCgAQGwAQ8&sclient=mobile-gws-wiz-hp
Not finding what you are looking for?