20 Most Recent Dell Dimension BMX Cassette hub 48h 14mmX180 12/16T 1/8 cog Questions & Answers


Thats a sign that you need your brakes checked or adjusted.

Dell Dimension... | Answered on Nov 15, 2009


You my friend have a stripped free wheel.  The only solution is to get a new free wheel or just go out and get a new rear wheel all together. 

Dell Dimension... | Answered on Apr 13, 2009


.330meter
13.1102362204866 inch
333 millimeter = 0.333 meter
http://www.onlineconversion.com/length_common.htm
Re: Jeff

Dell Cycling | Answered on Apr 11, 2012


testing testing check 1 check 2 check check can we get some gain on line 2 ?

Dell Cycling | Answered on Mar 23, 2011


Mother nature invented bacteria.....

Anton van leeuwenhoek discovered it.

hope i was helpful

Dell Cycling | Answered on Jun 26, 2010


Hi there, do you mean transportation? If so that is a term used for traveling around in a vehicle or on a bike.


Dell Cycling | Answered on Jun 24, 2010


Rake is the angle of the front forks

Dell Cycling | Answered on Feb 05, 2010


should be stamped into the bellcrank housing

Cycling | Answered on Sep 09, 2020


MIGHT NEED OILED IN A FEW PLACES . NOT KNOWING WHAT MAKE YOU HAVE DOES NOT HELP YOU WITH HELPING US FIGURE IT OUT EITHER

Cycling | Answered on Jul 22, 2020


If you shop around there are plenty of styles of handlebar. Might be worth you trying a bar from a dirt bike or some sort of cruiser bike.
Another option could be to tilt your existing bars back a small amount and add a fork stem riser. Sometimes simply raising the handlebar height on the fork top can help.

Cycling | Answered on Jul 16, 2020


I do not think this will help, but it might give you some ideas:

http://www.protecboardracks.com/products.aspx

Another design, that you would have to modify for your purpose but a very good idea:
http://www.woodcentral.com/articles/shop/articles_794.shtml

again use this principle and do your own drawings:

http://www.woodstore.net/lumstorrac.html

Cycling | Answered on Jun 27, 2020


I can't find a manual, but the install is pretty basic. You need to bolt it to the frame, then remove one of the sprockets on the derailleur to get the chain through, then replace. Attach the cable through the locking nut, using the lowest gear first, then run it to the highest gear to make sure it runs through them all. There are some set screws to set so that the derailleur doesn't go past the upper/lower gears. It's all a matter of adjustment from there.
Hope this is of help
Joe

Cycling | Answered on Jun 06, 2020


Here is the link for front derail...
https://www.amazon.com/SHIMANO-XT-FD-M786-Down-Swing-Derailleur/dp/B007HDMY2U/ref=sr_1_1?dchild=1&keywords=shimano+xt+front+derailleur&qid=1591136571&sr=8-1

Cycling | Answered on Jun 02, 2020


try manufacturer or online search

Cycling | Answered on Apr 23, 2020

Not finding what you are looking for?
Dell Dimension BMX Cassette hub 48h 14mmX180 12/16T 1/8 cog Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Dell Cycling Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

John Egan
John Egan

Level 2 Expert

85 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34000 Answers

Are you a Dell Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dell Cycling

  • Dell Cycling

Most Popular Question

rear chome whheel squeeks when break

  • Cycling
Loading...