20 Most Recent
Kenmore 23613 Progressive PowerMate Bagged Canister Vacuum - Page 4 Questions & Answers
How do I remove the bottom cover on powermate #26412690 to replace belt?
Squeeze in on each side of the cover with the headlight lense to remove it. There are two screws under the cover you will need to remove. Then flip the power nozzle over and insert a screwdriver between the base and top cover on the left and right sides to release the catch to remove the top cover to get to the belt.
Wand attached to hose - how do you detach? Kenmore central vacuum system model s107 34730
Many central vacuums have similar or the same parts made by a small number of manufacturers. I found the MD Central Vacuum website to be very helpful and I hope it solves your problem. I have attached pictures and descriptions from their website so you can see if this is what your wand looks like. If so, to separate the wand from the floor brush unit there should be a lever or button on the brush housing you can push with your foot to release the wand. If you are asking about where the wand connects to the hose you push that black button that you see at the top of the wand in the picture, the top smaller black part. I hope this helps.
Not finding what you are looking for?
