20 Most Recent Lazy Boy La-Z-Boy Horizon High-Back Office Chair with Arms - Page 8 Questions & Answers

If the bracket on your recliner assembly is wedged and won't come apart, there are a few methods you can try to loosen it:

1. Tap the bracket gently with a rubber mallet or a block of wood. This can help loosen any rust or debris that may be causing the bracket to stick.
2. Apply a penetrating oil, such as WD-40, to the bracket. This can help loosen any rust or debris that may be causing the bracket to stick. Allow the oil to sit for a few minutes before attempting to remove the bracket.
3. Use a pair of pliers or a wrench to grip the bracket and gently twist it back and forth. This can help loosen any rust or debris that may be causing the bracket to stick. Be gentle, you don't want to damage the bracket.
4. If the above methods do not work, you may need to use a saw or a metal cutting tool to carefully cut the bracket apart. Be sure to wear protective gear and use caution when working with tools.

If you are not comfortable with any of the above methods, or if the issue persists after trying them, it may be best to contact the manufacturer or a professional technician for further assistance. They may ask you to provide your chair's serial number and other information to help troubleshoot the problem.

FX101L Replaces FX-102 PCB121110K1 wine cooler control board for 10.5V output.

due to many reasons, your whynter wine cooler temprature can beep the main reason is to disrupt the proper storage not at the adjustable place also read for further detail... https://kitchencol.com/whynter-wine-cooler-temperature-flashing/

The Human Touch PC-075 recliner does not have a stop setting to limit the amount of recline. However, you may be able to adjust the recline tension by using the adjustment knob located under the seat. This will control the ease with which the chair reclines and returns to the upright position. Adding a mechanical stop to the recline mechanism is not recommended, as it may interfere with the chair's operation and potentially damage the mechanism. It's best to adjust the tension as needed using the adjustment knob.

Hello, Shartrice - The Mainstays trademark is owned by Walmart. I have not found assembly instructions for any Mainstays children's table and chair set online. Therefore, I suggest you contact Walmart Customer Service and ask about the availability of the assembly instructions for the model of table and chairs which you have. This is the link to the Walmart Contact Us web page: https://corporate.walmart.com/contact-us Best wishes.

there are many websites that have these kinds of shelves but you have to be more specific. Furniture is a really unending story, there are so many possibilities that you have to be very specific in what you are looking for: http://www.chiasso.com/shopping/modern-furniture/modern-shelving-bookcases.aspx

Or maybe: http://www.target.com/p/Adjustable-Maze-Bookcase-White/-/A-10976122?ref=tgt_adv_XSG10001&AFID=Froogle_df&LNM=%7C10976122&CPNG=furniture&ci_src=14110944&ci_sku=10976122

notify sealy for assistance

I hat the same problem with my Ergo Premier remote... I called the customer service at Tempurpedic, and the lady told me to push de FLAT button and hold it for 35 seconds. As simple as that. It is soon written RST on the screen... and it flashes... After 35 seconds, you can release it. The RST will disappear. And then it worked for me... The remote was functioning!

To replace the B03F4666 Temperature Control board for the AW-320ED wine cooler, follow these steps: Unplug the wine cooler and locate the control board inside the wine cooler. Remove the screws or connectors that secure the old control board in place. Disconnect the wires from the old control board. Connect the wires to the new control board in the same configuration as the old control board. Secure the new control board in place with screws or connectors. Plug in the wine cooler and test the temperature control to ensure it is working properly; https://kitchencol.com/edgestar-wine-cooler-lights-blinking/ If the instruction manual you received is not accurate, you can try finding a video tutorial online or reaching out to the manufacturer for clarification on the replacement process.

Question edited for clarity. Question moved from Office Equipment! The maker in China, or generic Amazon parts. https://www.google.com/search?q=controller+and+power+cord+for+irest+model+SL-A31 Write to Mr. Chen. Run the question through Google Translate and write in Simplified Chinese as well as English. https://irest-cn.en.made-in-china.com/product/EMfnRGyuIlhi/China-Electric-Luxury-Massage-Chair-SL-A31-.html ..

Moving the middle shelf on a Broyhill Attic Heirloom computer armoire may vary depending on the specific model. Here are some general steps you can try to move the middle shelf:

1. First, empty the shelf and any items that may be on top of it.
2. Locate any locking or adjustment mechanisms that may be holding the shelf in place. These mechanisms may include pins, levers, or knobs. Depending on the model, the locking mechanism may be located on the side, back or bottom of the shelf.
3. Once you have located the locking mechanism, release it by turning, sliding or pressing the lever.
4. Carefully lift the shelf out of the armoire and move it to the desired position.
5. Re-engage the locking mechanism to secure the shelf in place.
6. If you are having trouble locating the locking mechanism or if the instructions on your armoire are not clear, you may want to check the manual that came with the armoire or contact Broyhill customer support for assistance.

It is important to be careful when moving the shelves to avoid damaging the armoire or injuring yourself. If you feel unsure about doing this, it is best to contact a professional or Broyhill customer support for assistance.

If the foot of your Simmons Nuflex bed will not raise, there may be an issue with the motor or the lift mechanism. Here are a few things you can try to fix the problem:

1. Check the remote control: Make sure the remote is properly functioning and the batteries are not dead. Also, check that the foot lift button is not stuck.
2. Check the wiring: Check the wiring between the remote, the lift mechanism, and the motor for any frayed or disconnected wires. If you find any damaged wires, they will need to be repaired or replaced.
3. Check the lift mechanism: Inspect the lift mechanism and look for any visible damage or debris that may be preventing the foot from raising. Clean the lift mechanism and lubricate it with light oil.
4. Check the motor: If the motor is not functioning properly, it may be preventing the foot from raising. If the motor is faulty, it will need to be replaced.

If you are not comfortable with these steps, or if the issue persists after trying them, it may be best to contact Simmons customer support or a professional technician for further assistance. They may ask you to provide your bed's serial number and other information to help troubleshoot the problem.

A clicking sound when a recliner returns to its normal rest position can be caused by a variety of issues, including worn gears or loose parts. To repair the issue with your Fjords electric swing recliner, you can try the following steps:

1. Check for any visible damage or loose parts. Tighten any loose screws or bolts and secure any parts that may have come loose.
2. Locate and clean the gears. If the gears are dirty or have debris in them, the clicking sound may be caused by the gears not meshing properly. Clean the gears with a small brush and lubricate them with light oil.
3. Check the recliner's motor. If the motor is not functioning properly, it may cause a clicking sound as the recliner returns to its resting position. If the motor is faulty, you may need to have it replaced.
4. Check the recliner's transformer. The transformer is responsible for converting the voltage and can cause the clicking sound if not working properly. If this is the case, you may need to have the transformer replaced.

If you are not comfortable with these steps, or if the issue persists after trying them, it may be best to contact Fjords customer support or a professional technician for further assistance. They may ask you to provide your chair's serial number and other information to help troubleshoot the problem.

Error code 04,14 on an Ogawa 5020 massage chair typically indicates a problem with the chair's main control board. Some possible causes of this error code include a malfunctioning sensor, a software issue, or a problem with the power supply. To fix this error, you should first try resetting the chair by unplugging it from the power outlet and then plugging it back in. If the error persists, you may want to contact Ogawa customer support for further assistance. They may ask you to provide your chair's serial number and other information to help troubleshoot the problem. It's also possible that the error is caused by a hardware malfunction and may require a technician to repair or replace a component. In this case, Ogawa customer service may be able to connect you with a technician in your area or advise you on next steps.

NORMALLY, wine fridges have two sections, Upper Section for chilled white wines and Bottom section for red wine cellaring. In your case, they are reversed, but is definitely dual zone. https://www.manuals.ca/haier/hvtm12dabb/manual?p=7 ..

Good morning I found this leatherdoctor http://theleatherdoctorme.com/ Hope it is helpful. Kolbrun

There are three types of recliners you can look for: recliners with legs, European recliners and compact recliners. I have found you a site with a few of these options to browse through. I hope something will fit your space.

http://www.wayfair.com/Recliners-C413904.html?refid=ss222500

http://www.wayfair.com/Rissanti-Barstow-Push-Back-Recliner-in-Black-30095-GSC1031.html?refid=ss222500