20 Most Recent Roku Streaming Stick - Page 6 Questions & Answers

The codes expires every 15 minutes, when it does, simply click the OK button on the Roku remote that will give you the option to get a new code.

go www.roku.com/activate

You will need a USB port for TV. Once inserted change you tv to the USB port on TV menu and follows the onscreen instructions.

You probably need to register your account. It was probably just using a trial account.

Reset your local network!

Pairing usually refers to the Remote control. If your roku remote control is already working, you can ignore this.

For some reason, there can be a lag in the playback that becomes noticeable (especially with lower bandwidth), whenever I've had this problem, I exit the app, then reenter...if that does not work, I would suggest turning off the roku (unplugging it) and trying again. If that doesn't work it is either from low bandwidth or an error in the data streaming from the server.

Why do you need a roku if you have a smart TV? Anyways, if you plug the connector into the TV via your HDMI port, it should power on. switch your tv to that input, and then use the remote to scroll through the setup options and find your wifi and set it up. it is a farily simple process

component adapter? If your TV has a connection for DVI or VGA, you can purchase adapters that will change the HDMI to DVI/VGA if needed. Check online or go to radio shack

This sounds like a firmware issue. It may be possible to reinstall this yourself, however a more safe bet would be to get a replacement under your manufacturer's warranty (provided this warranty hasn't expired). Good luck!

The code is given during the guided setup.

Hello, here is youtuble video for setup of your device: Roku Streaming Stick HDMI 3500R Unboxing Review Set Up

HI! I would love to assist you with your concern.

Access this link on your computer www.owner.roku.com/link and enter the code. The code may expire, so you need to get a new code on your TV.

https://www.google.com/search?q=Roku+tv+remote+codes ..

Check the shielding of your antenna. Moreover make distance between VCR and antenna cable. In fact VCRs have a built in modulator and its signal is strong as compared to local antenna signal. There is another way, connect the local antenna in VCR RF In and connect RF Out of VCR to TV. In this scenario you have to tune your VCR to get the antenna channels instead of TV. It will solve your problem.