20 Most Recent
Kenmore 64663 Microwave Oven - Page 4 Questions & Answers
My kenmore microwaves light will not turn off when the door is closed and the start button isn't working.
I DON'T KNOW. BE VERY CAREFUL AROUND MICROWAVES DUE TO HIGH VOLTAGES AND RADIATION
ALWAYS UNPLUG IT BEFORE SERVICING THEM. YOUR
SYMPTOMS SUGGEST THE DOOR SWITCH NEEDS TO BE REINSTALLED OR REPLACED. IT SEEMS IT IS IN THE 'OPEN DOOR' POSITION. . I RECENTLY REPAIRED ONE. I UNPLUGGED IT AND REMOVED THE OUTER SHELL. I COULD SEE THE VARIOUS OFF/ON SWITCHES AND THEY JUST SNAPPED INTO PLACE INTO PLASTIC HOLDERS. I USED IDENTICAL SWITCHES FROM OLDE THROW AWAY MICROWAVE.OF A DIFFERENT BRAND,
TO MY SURPRISE, THEY BOTH USED SAME SWITCHES.
5/22/2019 7:50:51 AM •
Kenmore...
•
Answered
on May 22, 2019
I'm trying Locate the fuse to Kenmore microwave oven Model # 721.808235000
Your support page is here.
https://www.searspartsdirect.com/model-number/72180823500/0583/0123370.html?searchType=modelSearch&q=721.808235000&searchTerm=721.808235000
There are a couple of other parts which could render the oven "dead," but the fuse is located on a noise filter circuit board located behind the controller.
You need to remove the grill at least, then you may be able to see the fuse, but if not, you will also need to remove the controller assembly.
At my web site I have a video showing you how to remove a typical over-the-counter grill and controller assembly in about 5 minutes.
after you see the video, if you have other questions, please feel free to contact me by email through my site.
http://www.microwavecontrol.com
12/24/2018 1:31:06 AM •
Kenmore...
•
Answered
on Dec 24, 2018
Stop/clear button not working on kenmore microwave
Unless there is grease or moisture on the control board, especially in the area where the keypad plugs in, then you would have a failing membrane keypad.
But neither part you would need to repair this is available any longer.
Please feel free to follow up if you have more questions.
Ed Miller
[email protected]
MicrowaveControl.com
10/27/2018 11:57:13 PM •
Kenmore...
•
Answered
on Oct 27, 2018
Not finding what you are looking for?