20 Most Recent
KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher - Page 9 Questions & Answers
Kitchenaid dishwasher doesn't drain. Could it be plugged? How to clean?
First, remove internal filter below the bottom rotor. Work carefully so you can reinstall. If you have a wet/dry vac, shopvac, remove the filter bag and then suck out the water and clean the bottom of the machine. ( the sump, the low spot inside the appliance. ) Sometimes a popcorn husk or a bit of glass or plastic can get by the filter and clog the pump. The sump is designed to retain a little water between cycles to keep the seals wet so don't worry if there is a bit left after a cycle. (not enough to cover the bottom but a 1/2 cup or so). If this doesn't solve you problem, check the drain hose from end to end. Sometimes it can get too sharp a bend or plug at the sink end.
10/23/2018 12:17:06 AM •
KitchenAid...
•
Answered
on Oct 23, 2018
Kitchenaid dishwasher burning smell
The dishwasher may use the heating coil to increase the water temp, Also utensils fall into the bottom of the unit and can melt. The heater coil may be about to fail and when this happens the temp increases. The filament inside the coil may have worked its way to the outer shell. Last but not least, the pump motor could be overheating.
Superba 8524570
Short answer NOPE!
Get a different repairman to come and retest the fault.
Not finding what you are looking for?