Top 20 American Standard 5 ft Sliding Shower Door - Page 5 Questions & Answers


Shut the water off flush toilet and there should be two bolts that you can see at the under side of that tank. You need to remove them bolts and lift off the tank and install a new seal. Sometimes i mean sometimes you can tighten them a little and they will stop leaking. If it has been for awhile id just replace it.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589

American... | 674 views | 1 helpful votes


There is a clog in the line. A plunger usually solves this problem, but you have to use a toilet plunger. Your local hardware store will give you the right tool ($13). If the plunger doesn't work, you need a toilet auger (also called a closet auger), which you can buy for less than $20.

American... | 530 views | 0 helpful votes


Bad flapper valve or water level is above overflow tube. Replace flapper or lower float.

American... | 87 views | 0 helpful votes


O ring on fill tube? or on tank?

American... | 35 views | 0 helpful votes


I haven't sat on your toilet, so the rockin' don't come from me! Our grandpa had a habit of slamming his [email protected]@ down on the toilet here at my house, so now it rocks when sat on. The bolts have shifted, or the wax ring was smisshed. If you take off the toilet from the floor, and find out either/or, let me know.

American... | 166 views | 0 helpful votes


I seen two tpyes one where the inter jet unscrew and the other where the outter ring unscrews not sure what kind you have . Went to the pool store and they had a cleaner you add to the water and then run the unit for about 20 minutes then drain . It seem to work pretty good and there was less hassel taking the jets apart

American... | 385 views | 0 helpful votes


most likely the chain that comes from the handle is holding the stopper.so just give the chain a little slack.

American... | 42 views | 0 helpful votes


You may have dirt getting into your water from the well and clogging the fill valves in your toilets. Valve assembly can be opened and cleaned out from the top. Instructions are available on AS website for your model. (Note) If you are picking up material from your well, a sediment filter should be added to your water line.

American... | 93 views | 0 helpful votes


Check the aerators for debris. Aerators are located at the end of the spout where the water comes out. Usually these unscrew counterclockwise (some models require a tool). Rinse out and reinstall. They may be just a lower flow model.

American... | 68 views | 0 helpful votes


There is a rubber gasket between the urinal outlet and the pipe it connects to in the wall. Pull the bolts holding it to the wall and pull it away carefully. If it has been siliconed to the way, you'll have to cut it. Swap out the gaskets. Be careful not to pinch the new gasket. Ask at your local plumbing supply for the gasket of your particular model. They'll know what your talking about.

American... | 3,850 views | 2 helpful votes


0
If you mean first, it is tenths. (or .7)

American... | 28 views | 0 helpful votes


There is a plastic cap that you need to flip open. You can do this by prying the flap at the top of the hinge. Once you pop it open you will need a screw driver to turn the screw that is inside/underneath the hinges. Turn the screw clockwise until it is good and snug. then snap the hinge cap back into place by applying pressure to it.

American... | 676 views | 0 helpful votes


' /* * For text ads, append each ad to the string. */ for(i = 0; i ' + 'Ads by Google' + '' + google_ads[i].line1 + ''; url = '' + google_ads[i].visible_url + ''; info = makeBoldAdWords(google_ads[i].line2) + ' ' + makeBoldAdWords(google_ads[i].line3) + '
'; s += url + info; s += ''; } s += ''; } document.write(s); G_GGL_SKIP += google_ads.length; return; } var G_MAX_ADS_WL = 1; google_ad_client = "pub-8183356113384228"; // substitute your client_id (pub-#) google_ad_channel = "4447185069+1147946396"; google_ad_output = 'js'; google_max_num_ads = '1'; google_ad_type = 'text'; google_feedback = 'on'; if(typeof G_GGL_SKIP == 'undefined') { G_GGL_SKIP = 0; } google_skip = G_GGL_SKIP; // --> google_protectAndRun("render_ads.js::google_render_ad", google_handleError, google_render_ad); Problem with the American Standard Bathtubs / Whirlpools By bassassist69 on Sep 02, 2011
Hello: Please contact us at Wmerican Standard Brands and we will gladly help you.
1-800-442-1902
Monday through Friday
8:00 A.M. to 7:30 P.M. EST

Technical Customer Service
Monday through Friday
8:00 A.M. to 6:00 P.M. EST
8:00 A.M. to 3:00 P.M. EST Saturday

-Paul, on behalf of ASB

American... | 306 views | 0 helpful votes


Improve the quality of material in use

American... | 459 views | 13 helpful votes


Hi delen zxi...
Replace your flapper valve as it is faulty and causing your leakage and refilling problem...
See the following YouTube video to explain how to install a new flapper vave..
Please take time to rate me thumbs up

http://www.askthebuilder.com/Toilet_Flapper_Valve_Video.shtml

American... | 118 views | 0 helpful votes


Is it leaking on the floor, or just into the bowl.
You can find replacement parts at any hardware or plumbing store.

American... | 169 views | 0 helpful votes


Actually sounds like trash in the toliet water valve.....or possible that if teflon tape was used to seal threads has been drapped accross inlet threads and caused blockage......Best way to check this is to take supply line loose from toliet and slowly turn water on while pointing the supply into a bucket or something to catch the water and see if the pressure is ok......Then check valve to see if grit or blockage is in the toliet valve.........Depends on valve design to whether or not you will be able to clean....may have to replace toliet valve with new one......hope this helps

American... | 123 views | 0 helpful votes


I have one. Call me at 510 559 0623.

American... | 434 views | 0 helpful votes


Configure

American... | 2,048 views | 14 helpful votes


If the pump hums and does not pump the water then there is a probability that the pump does not pump. Usually when most pumps spoil they still hum and sound like they are functioning fine but in actual fact they have stopped working. First get the pump checked out if it has water supply intact if the supply of water to the pump is okay then the pump might need replacement or fixing as this means the pump is bad.
Usually due to the cost of replacement pumps most people prefer to fix instead of just replacing, get a trusted expert to help you check if the pump is worth repairing or should just be replaced.
Hope this solution has been helpful?
Thank you for visiting FixYa.

American... | 260 views | 1 helpful votes

Not finding what you are looking for?
American Standard 5 ft Sliding Shower Door Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top American Standard Home Experts

Mike

Level 3 Expert

4369 Answers

john h

Level 3 Expert

23438 Answers

Bill Johnson

Level 2 Expert

306 Answers

Are you an American Standard Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

American Standard Home

  • American Standard Home

Most Popular Question

flair shower door runner

  • Home
Loading...