KitchenAid KSB3 Classic Work Top Blender - Answered Questions & Fixed issues


The motor windings have failed. It needs the motor replaced, so it will need to go to a repair center near you. You can find all the information you need from their website.

KitchenAid KSB3... | Answered on Nov 16, 2017 | 303 views


Sounds like its overloaded. Feed it slowly

KitchenAid KSB3... | Answered on Oct 01, 2017 | 493 views


Either the coupling from the motor with the fingers on it is not really attached to the motor shaft or the drive on the blade that engages with it is not attached to the blade shaft. One other thing is that on some models if the rubber jar seal between the beaker and the blade carrier is in the wrong place it can raise the blade drive to not engaging properly with the motor coupling. The gasket goes between the jar and the blade carrier, not under the blade carrier.

KitchenAid KSB3... | Answered on Sep 06, 2015 | 393 views


this part is broken. Ineed know the price and shipping and handling 1_19_2013_5_26_53_pm.jpg1_19_2013_5_27_09_pm.jpg1_19_2013_5_27_18_pm.jpg1_19_2013_5_27_39_pm.jpg

KitchenAid KSB3... | Answered on Jan 19, 2013 | 401 views


It is very easy to fix. You will need a new coupler, which is part number 9704230. There is a set of instructions with video here:http://www.kaparts.co.uk/Howtoremoveablendercoupler/tabid/219/Default.aspx The part is available on Amazon as well as many other sites.

KitchenAid KSB3... | Answered on May 07, 2011 | 246 views


Hi. Our Bobby Blender jar broke and we can't find a replacement. We can part it out; do you still need the blades?

KitchenAid KSB3... | Answered on Nov 07, 2010 | 364 views


This is a common problem. This usually happens when either A) too many ingredients are added to the jar or B) the blade spokes do not sit properly in the coupling (the rubber piece). The coupling can be replaced easily. There is a great video on Applianceinsider.com on how to take the coupling off as recommended by KitchenAid themselves. The part can be found at 1800parts.com if you call them their reps are extremely knowledgeable and will be able to help you find the part in seconds. Or if you have the model number you can locate it right on their site.

KitchenAid KSB3... | Answered on Sep 15, 2010 | 156 views


Have you tried the fuse first....

If it is the motor (quite rare), these people may be able to order you one:
http://kitchenaidblenders.co.uk/Home/tabid/36/c/KitchenAid-Blender-Spares/CategoryID/6/Default.aspx

KitchenAid KSB3... | Answered on Sep 03, 2011 | 750 views


look on ebay for a replacement second hand unit

KitchenAid KSB3... | Answered on May 14, 2010 | 997 views


Watch this video. If your jar has a lid that screws in rather than pushes in you unfortunately have to purchase a new lid, blade, gasket and collar.

KitchenAid KSB3... | Answered on May 13, 2010 | 260 views


there is a voltage regulator inside the circuit board , this might have got wet some how . this circuit controls 1-10 speed from a touch of a button . will have to disassemble unit , Auth personal should check this , unless you know electronics

KitchenAid KSB3... | Answered on May 02, 2012 | 170 views


Yes, it is very easy to fix. You will need a new coupler, which is part number 9704230. There is a set of instructions with video here: http://www.kaparts.co.uk/Howtoremoveablendercoupler/tabid/219/Default.aspx

KitchenAid KSB3... | Answered on Feb 13, 2010 | 746 views


Actually the drive gear was vulcanized onto the shaft during the production. If you can get glue to hold it on you're all set but I think you'll end up replacing the whole blender soon. Thank you, Dana

KitchenAid KSB3... | Answered on Oct 18, 2009 | 165 views


Take it apart and pit the gasket on the other side of the cutter assembly.

KitchenAid KSB3... | Answered on Oct 04, 2009 | 400 views


The lid gasket is not available as a separate piece - an entire lid would have to be purchased. Kitchenaid still has inventory on replacement lids. If you'd like to order, you may call Kitchenaid Customer Service. Their toll-free telephone number is:

1.800.541.6390.

If you would prefer, you may also try MENDINGSHED.COM. They carry a large inventory of Kitchenaid parts, even if the model is out of manufacture.

KitchenAid KSB3... | Answered on Aug 08, 2009 | 492 views


Depending on the age of your blender, a new blade assembly may be available. I would recommend calling Kitchenaid Customer Service for pricing. Their toll-free telephone number is:

1.800.541.6390

KitchenAid KSB3... | Answered on Jul 28, 2009 | 528 views


The piece that you need is referred to as the coupler. The coupler is a breakway part that is designed to shear and/or wear down in the event that the blender is overloaded. This is to avoid damage to the motor.

The coupler may be purchased individually and is an easy repair that can be done at home. You may purchase the part and access step-by-step replacement instructions at the following link:

http://www.mendingshed.com/kacoupling.html

KitchenAid KSB3... | Answered on Jul 07, 2009 | 669 views


to see if its the Triac or just the off button perform this: connect the blender,while pressing the off button press the on button; if the blender stays on and you dont hear the relay function (Light ticky sound) maybe the off button get a broken solder point. But if the relay is functioning and there is no way to change the speed the problen is the TRIAC. This is a small piece on PCB with a heat sink

KitchenAid KSB3... | Answered on Nov 03, 2008 | 227 views


the top rubber piece could be worn enough that it is not engaging the pitcher. look at it carefully and see if the "teeth" of the rubber disc on top of the base has not cracked and worn away. a picture of the new one can be seen on the parts websites to compare I spent $10.00 for my replacement but i found them at other sites for $6.00. you will need a very skinny 7mm open ended wrench to get the old one off and it is left handed threads that means clockwise will loosen not tighten the part.i ground down my wrench but an ignition wrench from an auto store will usually be thin enough to reach the flats on the shaft under the rubber disc

KitchenAid KSB3... | Answered on Jan 31, 2013 | 792 views


Alternating blinking lights on a Kitchenaid blender indicate a bad circuit board which is unable to run the motor properly. Unplug the blender, take the jar off, and turn the spindle by hand. Then plug it back in. If it does not work properly, try a different outlet (perhaps not in the kitchen). If nothing works, the blender needs to be repaired.

KitchenAid KSB3... | Answered on Jun 14, 2008 | 8,239 views

Not finding what you are looking for?
KitchenAid KSB3 Classic Work Top Blender Logo

33 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Blenders Experts

Appliance engineer

Level 2 Expert

225 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Cindy Wells

Level 3 Expert

6199 Answers

Are you a KitchenAid Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...