20 Most Recent KitchenAid KSB3 Classic Work Top Blender - Page 9 Questions & Answers

Check with a small appliance repair station for parts availability.

Blenders | Answered on Mar 12, 2019

There's not enough detail to help solve your issue. Can you please post the brand name and model number?

Blenders | Answered on Feb 02, 2019

Call 1-888-367-7373
Business Hours: Mon - Fri 10:00am - 5:00pm EST

Or email: [email protected]

Blenders | Answered on Feb 02, 2019

I have a 9090 I am selling (all blades) including wall rack. If interested let me know.

Blenders | Answered on Jan 14, 2019

Hello, Colleen -

I have no idea what "the plastic part" means for your Everstar blender. I don't even know the model number for your Everstar blender.

I have searched online to find a source or sources for Everstar blender replacement parts, but so far have not found any.

It seems the Everstar brand name for blenders was owned by Homer TLC, which also owns the trademark for Home Depot. I do not find that Everstar blenders are still manufactured for sale.

You may wish to check on the website of one or more online resellers: eBay, LetGo, etc. to find the same model of blender as yours for sale, so that you can cannibalize it for parts.

Best wishes.

Blenders | Answered on Jan 08, 2019

I know this is an old, old post, but I could not find a solution anywhere, so hopefully this will help someone. We have a model 51BL25, similar to scottman55's blender, and it had the same problem. There are two separate nuts in the blade assembly. One holds the blade on, and the other holds the seal tight. When the latter gets loose, the blender shakes and leaks.
To fix it, first you have to remove the top nut holding the blade on. I had to get in there with pliers, but a ratchet with an extension would be perfect. This nut is right-handed ("normal"). Once that nut is loose, you can remove the nut and the blade. You will also want to remove the washer immediately under the blade (take note of which side goes up).
Now, you can pull the whole axle out by the wheel on bottom of the blender. This exposes a really thin, flat nut. In my case, this nut had come completely off, so nothing was really holding the seal together at all. Again, make sure you remember which direction the nut goes -- it is not quite symmetrical. That nut is what comes loose when the blender starts leaking. By the way, it is a left-handed nut, so it screws on counter-clockwise ("backwards"). Screw it in tight, then put the rest of the blade assembly back together, and your done. If you have the right tools, it should take only maybe 5 minutes.
Depending on your problem/model, this may or may not solve your problem. Hope it helps!

Blenders | Answered on Jan 07, 2019

Not finding what you are looking for?
KitchenAid KSB3 Classic Work Top Blender Logo

33 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Blenders Experts

Appliance engineer

Level 2 Expert

225 Answers


Level 3 Expert

8597 Answers

Cindy Wells

Level 3 Expert

6199 Answers

Are you a KitchenAid Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

KitchenAid Blenders

  • KitchenAid Blenders

Most Popular Question

replace glass jug

  • Blenders