20 Most Recent KitchenAid KSB3 Classic Work Top Blender - Page 5 Questions & Answers


poss.if taken apart and reassembled ,you did not reassemble properly causing something to catch,or your switch is dirty with debree,clean contact on switch. does the motor have a burnt smell to it if so then toss it and get another.

KitchenAid... | Answered on Oct 13, 2010


It's reversed threaded. tap in cw direction to remove. use a flat blade screwdriver and small hammer.

KitchenAid... | Answered on Aug 23, 2010


Hi, you have broken the coupler (sometimes called a coupling). It is relatively cheap and easy to replace. In the UK, K A Parts Limited sell them here and provide removal instructions here.

KitchenAid... | Answered on Jan 28, 2010


Hi, exactly the same thing happended to me. Apparently the repair shop can replace the rubbery bit for $20 (NZ)

Jules

KitchenAid... | Answered on Jan 24, 2010


well theres a couple of things you can do one is to soak the spring and ring in warm water with a dish cloth then take a butter knife and try to pry it up very carefully this usually works the other is to steam it free but that is very time consuming.

KitchenAid... | Answered on Dec 21, 2009


You will definitely need to change the clutch blade i.e. the black rubber rotating bit. Chaging it on the base unit may be difficult, I would check with your local Kitcheaid repairer for spare parts and repair advice.

Also check the clutch blade on the jug itself.

KitchenAid... | Answered on Apr 07, 2009


Hi,
There are several different control boards used in Kitchen Aid blenders. Call my store with your model # and I will give you price and availabity. 1 888 643 9806 9:00 - 5:30 Pacific time.

Mike

KitchenAid... | Answered on Jul 18, 2008


https://www.amazon.co.uk/Gordon-Ramsay-Cooks-600w-Blender/dp/B003UTUO2M

Blenders | Answered on Nov 20, 2020


The blades may not be turning because the blade assembly is not fully tightened onto the blender bottle. Another reason could be that you are not putting the blender bottle and blade assembly into the blender base in the proper way. For more answers visit the Oster Blend-N-Go My Blend troubleshooting page: Oster Blend-N-Go My Blend Troubleshooting

Blenders | Answered on Nov 20, 2020


https://youtu.be/dklwnGPwHVw

Blenders | Answered on Nov 20, 2020


The shaft has probably become tight in the bearings and the assembly will need to be dismantled for cleaning and possibly lubrication - I am unfamiliar with the Ninja but the average blender is a fairly basic mechanism and not many fasteners have to be removed before the parts needing attention either fall off or can be removed. It is a fairly intuitive process for the handy person.

You could perhaps start with the nut on the blade - there seems enough exposed thread to judge whether it is left or right hand thread and it shouldn't be particularly tight. Lots of cloth should be used when holding the blade...

Blenders | Answered on Nov 14, 2020


The thermal fuse must be in intimate contact with the motor so when the motor temperature climbs dangerously high the fuse temperature doesn't lag far behind.

I have seen the thermal fuse buried in the windings of a transformer so it isn't beyond the realms of possibility it could be inside the motor. The thermal fuse body is metal and live and so must be insulated and so is generally found in the supply wire inside some heat resistant sleeving strapped firmly to the motor...

Blenders | Answered on Aug 09, 2020


try rotating the container part 1/4 of a turn to line up slots and press down . then if it does not blend turn another 1/4 turn to line up slots and press down pushing container into base motor unit .
container and screw on blade lid is put in upside down and the plastic posts have to match the base unit to turn on the blender when you press down on container into base unit.

I own and use a ninja blender !.

Blenders | Answered on Jul 04, 2020

Not finding what you are looking for?
KitchenAid KSB3 Classic Work Top Blender Logo

33 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Blenders Experts

Appliance engineer

Level 2 Expert

225 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Cindy Wells

Level 3 Expert

6196 Answers

Are you a KitchenAid Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

KitchenAid Blenders

  • KitchenAid Blenders

Most Popular Question

replace glass jug

  • Blenders
Loading...